Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Xplicit 2.0 on 10 March 2010, 16:14:50
-
Sorry if this is the wrong section but i thought i could get away with it as this lot is in my omega :P :P
Ok, not sure who remembers me having a small issue with this before (DND-Dave solved it straight away last time - bad earth) but i have a new issue with this lot now... as far as me and 3 others can see, nothing is out of place. no wires have been moved etc etc but i am getting no output from my subs apart from one of them buzzing.
The amp is all lit up and fine, the RCA's are in at both ends and so is the remote wire.
Earth not been touched, nor the live. The only thing that has happened recently was i un-wired 1 of the subs so i had a bit more room to sort out the boot lid i changed at the weekend.
Any ideas? :-? :-?
-
Are you sure that you have wired them back into the correct location on the amp?
Assuming you are using them in bridged mode on teh sub, using the wrong +ve / -ve terminals woudl cause a similar fault.
Also check the amp switches for sub operation have not been disturbed?
:-?
-
checked all switches... they are as they were... not using bridged as i hav 2 12" subs so 1 on each channel... as for when i removed the sub, the wires were removed from the sub side, not the amp side... that shouldn't stop output though, just sound different as speakers will work both ways (as far as im aware... i may well be wrong though)
-
In that case, re-check the earth on the amp again
-
You didn't by any chance turn music on and allow the wires to the sub to short together while they were disconnected? (Even by accident with out you knowing they were moving around in the boot)
This could have caused the output to the AMP to get fried :-(
-
You didn't by any chance turn music on and allow the wires to the sub to short together while they were disconnected? (Even by accident with out you knowing they were moving around in the boot)
This could have caused the output to the AMP to get fried :-(
Sadly, that was my next suggestion :'(
-
as far as i remember the ignition was not on at all whilst wiring...
EDIT: my old man being the ex sparky that he is, has it apart at the mo... and its smells a lil burnt... not happy :'(
-
as far as i remember the ignition was not on at all whilst wiring...
EDIT: my old man being the ex sparky that he is, has it apart at the mo... and its smells a lil burnt... not happy :'(
Bum :'(
-
i dont know what i will do now... no base... jus tinny music :'(
-
i dont know what i will do now... no base... jus tinny music :'(
Hope that your ex-sparky old man knows what he is doing if he has it in bits
::)
-
haha, all he did was take off the back panel and said yep... thats been cooked >_<
-
I just hate tinny music >:(I tried living with the miggy standard stuff for 8 months, convincing myself it was ok...Wrong!!I feel for you and hope you get it sorted out. Get those subs pumping soon :y
-
already on to it... jus ordered a new 3000w 4 chnl amp =D shud be here tomorrow or monday :D:D