Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: I_want_an_Omega on 11 April 2010, 14:12:12

Title: Gearbox software: One for TB ?
Post by: I_want_an_Omega on 11 April 2010, 14:12:12

Hi,

One for TB maybe..........

Jamie upgraded my gearbox software a few months ago, but the question is, where is that software stored? Is it in the gearbox ECU or the engine ECU. If I were to change the gearbox ECU then would the upgraded software go "with" the ECU and I'd then have whatever software was in the replacement ECU?

Thanks .......... Rob

Title: Re: Gearbox software: One for TB ?
Post by: Jimbob on 11 April 2010, 14:47:26

that is my understanding, stored in the gearbox ecu, drivers footwell iirc.

Title: Re: Gearbox software: One for TB ?
Post by: TheBoy on 11 April 2010, 21:44:12

Yes, stored in gearbox ECU. Replace the ECU, replace the firmware ;)

If you are changing ECUs, ensure you use the one for the right engine (identical part numbers, but different configs for the different engines)