Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: albitz on 31 May 2010, 20:01:39

Title: No radio display
Post by: albitz on 31 May 2010, 20:01:39
I have just changed my climate panel. When I put everything back the radio doesnt show on the MID and doesnt want to tune to different staions etc, it is stuck on one station with poor reception.
Before I pull it back out to investigate, would this just be due to the fact that I need to enter the code, or have I not connected it back up properly ? :-/
Tia.
Title: Re: No radio display
Post by: same #same# on 31 May 2010, 20:18:12
dose screen part go blank with radio on? may just need pushing the plugs back on
Title: Re: No radio display
Post by: RobG on 31 May 2010, 20:20:01
Sounds like radio is not seated properly and not fully engaging rear connectors
Title: Re: No radio display
Post by: albitz on 31 May 2010, 20:25:05
Looks like I will have to pull it back out again. The unit is pushed fully home so the connectors may not have seated properly in the cage and popped out. :(
Title: Re: No radio display
Post by: RobG on 31 May 2010, 20:28:09
Remove the cage and make sure they`re fully clipped in
Title: Re: No radio display
Post by: albitz on 01 June 2010, 19:19:37
Took the head unit back out today. The multi plugs and antenna lead are all clipped into the cage as they should be.Put the unit back, still no radio display on the MID.
Im stuck tbh, dont know what to do next. :-/ :'(
Title: Re: No radio display
Post by: same #same# on 01 June 2010, 19:26:03
leve the radio out and take the display out and check the wires from display to radio 3 brown and white wires and a black wire and red wire check them 3 brown and white wires control the display pic.
Title: Re: No radio display
Post by: same #same# on 01 June 2010, 19:37:35
sorry mist one blue and white wire also tells dsplay that radio is on.
Title: Re: No radio display
Post by: albitz on 01 June 2010, 23:43:56
will try to have a look tomorrow.Thanks. :y
Title: Re: No radio display
Post by: albitz on 02 June 2010, 13:22:33
Sorted now. Although the connectors were clipped into the cage they werent quite seated properly. A bit of fiddling and shoving and its ll ok. :)
Title: Re: No radio display
Post by: same #same# on 02 June 2010, 17:17:51
good :y