Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: mindaz on 13 July 2010, 06:46:55

Title: siemens NCDC2013 CID problem
Post by: mindaz on 13 July 2010, 06:46:55

hey pals, one day ago my info display became blury ,
Can it be fixed  ::), or it is dead end for this display ?
How much it will cost £?

(http://img824.imageshack.us/img824/9012/cid001.th.jpg) (http://img824.imageshack.us/i/cid001.jpg/)

Title: Re: siemens NCDC2013 CID problem
Post by: zirk on 13 July 2010, 12:17:08

Not cheap to replace, theres some German ebay guys reckon they can fix them, also other issues about de pairing and pairing the HU and CID if you do get a replacement, but I'll let the experts on here explain that one.

Chris.


Edit, Just noticed you drive a 2.5DTi, so you must already be on the other side of the Channel. That should help.
 :y

Title: Re: siemens NCDC2013 CID problem
Post by: TheBoy on 13 July 2010, 18:25:38

Looks like knackered LCD panel.  From memory, its a Sharp LQ126AW panel (double check, sticker on back of LCD unit.  Sadly, that panel is obsolete.  LQ136 works in its place, but also difficult to source

Title: Re: siemens NCDC2013 CID problem
Post by: mindaz on 16 July 2010, 18:21:57

LCD display works again,
thankz for advices  :y

Title: Re: siemens NCDC2013 CID problem
Post by: pscocoa on 16 July 2010, 19:36:26

This is how mine started - it works then it doesn't - then you bang dashboard and it works - over time will just get worse. I bought replacement off German ebay which unfortunately had a fault which The Boy helped confirm and had to send back for supplier to fix - which they did. Has been fine for nearly 3 years now.

Title: Re: siemens NCDC2013 CID problem
Post by: zirk on 16 July 2010, 20:05:44

Quote

This is how mine started - it works then it doesn't - then you bang dashboard and it works - over time will just get worse. I bought replacement off German ebay which unfortunately had a fault which The Boy helped confirm and had to send back for supplier to fix - which they did. Has been fine for nearly 3 years now.

Rubber Mallet in boot then!  :y