Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Fazeel on 10 August 2010, 22:40:13
-
ok, so I have this spoiler fitted on the boot lid,
now the problem is that I think its custom fitted because it has this wire plugged in with the right hand side brake light in the tail light,
what happens because of that is sometimes i dont know how, the right hand side brake light stops working, and I get that message on the display, and i starts working when i remove the wire for the spoiler's brake light.
What do i do to keep then both working ??
-
Have you actually proved its not working by getting someone to stand behind the car (or reverse up to a wall at night)???????
The Telltale check only measures resistance on the 'lamp' circuit. It has a tolerance. If you have extra lights wired into this circuit, it will probably pick up a fault.
-
yup, checked it by making someone stand at the back, and it doesnt work :(
Its like I have to choose between any one of the lights, lol :P
-
im assuming the boot spoiler is after market and you have:
n/s , o/s and a centre rear screen brake light?
are the spoiler lights led?
-
i dont know whats n/s and o/s,
but yeah it has center rear screen brake light at the bottom
-
sorry, left hand right hand rear lights. what im thinking is that regardless of what the display says, you should be able to get all the lights on , unless the light has been wired in "series" and not parallel as led s only work "polarity" wise one way.