Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: kitrace10 on 10 August 2010, 22:47:36
-
Hi i have a 2.5 td 2000 W reg and the passenger side indicator has stuck on solid not flashing and the only way to get it off is to take out a fuse or take the battery lead off. the fuse i am taking out i believe has a triangle on it and from memory had K19 on it , when this fuse is removed lots of things dont work including the computer but if i then turn the indicator on the computer flashes on and off with the indicator. i have found other posts from people with the same problem but nobody seems to be saying if they have found the problem and what it was. Any help appreciated.
-
its most likely to be the relay.
it is in beside the ecu/battery and is yellow in colour the other thing that can cause this is the hazard switch.
try relay first :y
-
Most probably is the relay! Give that a shot, theyre cheap to pick up! ;D
-
Does it do it when the ignition is on or just when it's off?
-
The relay in question is the one behind the glove box and is operated by the CDL/alarm unit :y
It flashes the lights when you lock/unlock the car and when the alarm goes off.
It can be removed until you get a replacement.
If you remove the glovebox there are a few relays there tucked away. You can narrow it down by locking/unlocking the car with the remote whilst touching the relays in turn until you can feel/hear it click.
You will need to prise it out as its been there for 10 years and will be tight.
Get a replacement at your leisure and pop it back in :y
-
many thanks for all the replys , i will take the relay out when it does it again as it has been ok for a week now.