Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: jack68 on 28 February 2011, 08:27:55
-
Hopefully i now have all the bits i need. I'm looking at the five pin pklug from the old projectors and it has 4 wires in it and i have the one i've taken from the HID donor car and it has three wires. I'm assuming that the yellow wire into the Ballast box is the live for it and the brown wire is the earth. The question i have is can i take a feed off the brown wire in the five pin plug and place it in the ballast box?
Please don't ask me about the self levelling etc as i'm not fitting it i'm only adding the headlights.
Jack
-
Leave projector plug in place (in case you need to swap back). Replace HID level motor with the projector motor....splice the yellow & brown wires from the HID plug into the yellow & brown wires on the projector plug. Fit 30A fuse in the fuseway at front of triangular relay box by battery (for washers).
-
Cheers Rob looks like another job for the weekend.
Jack