Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: RobG on 17 April 2011, 16:24:31

Title: Loom to drive a CID. Parts needed
Post by: RobG on 17 April 2011, 16:24:31

One for The Boy or VXL V6. What bits are needed to make up a loom to drive the CID :-/

Title: Re: Loom to drive a CID. Parts needed
Post by: zirk on 17 April 2011, 18:36:26

pm sent Rob.

Chris  :y

Title: Re: Loom to drive a CID. Parts needed
Post by: VXL V6 on 17 April 2011, 18:44:21

Best to make it utilising a Trafficmaster loom. Will also need the 12 pin RGB plug and some loom, quite difficult to locate the plug but they can be had from ebay.de or you can use a CDC2 autochanger plug.

Title: Re: Loom to drive a CID. Parts needed
Post by: albitz on 17 April 2011, 18:48:16

Quote

One for The Boy or VXL V6. What bits are needed to make up a loom to drive the CID :-/

Wires.  :y



Sorry Rob - couldnt resist. :D ;D

Title: Re: Loom to drive a CID. Parts needed
Post by: RobG on 17 April 2011, 19:53:51

Quote

Quote

One for The Boy or VXL V6. What bits are needed to make up a loom to drive the CID :-/

Wires.  :y



Sorry Rob - couldnt resist. :D ;D

(http://www.easyfreesmileys.com/smileys/free-cool-smileys-1039.gif) (http://www.easyfreesmileys.com/facebook-smileys.html) ;D

Title: Re: Loom to drive a CID. Parts needed
Post by: RobG on 17 April 2011, 20:08:10

Quote

Best to make it utilising a Trafficmaster loom. Will also need the 12 pin RGB plug and some loom, quite difficult to locate the plug but they can be had from ebay.de or you can use a CDC2 autochanger plug.

Got it :)