Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: Big_Al on 18 April 2011, 18:06:08
-
i have looked on the FAQ section. Seems I have a CID but not getting any full colour maps. Is there only one type? . Model is 2000 facelift Elite & screen is full size. When not using sound system or sat nav screen has Colour VX logo & Bose logo showing.
Is this the CID ?
Sorry guys, not much good with all this electronic stuff. :-[ :-[ :-[
Any help greatly appriciated :y :y
-
i have looked on the FAQ section. Seems I have a CID but not getting any full colour maps. Is there only one type? . Model is 2000 facelift Elite & screen is full size. When not using sound system or sat nav screen has Colour VX logo & Bose logo showing.
Is this the CID ?
Sorry guys, not much good with all this electronic stuff. :-[ :-[ :-[
Any help greatly appriciated :y :y
Yep. Have you got the Navdisc inserted in the top slot :question
-
Is the 12Pin plug plugged in on the rear of the screen? That's the usual reason for no maps.
-
Is the 12Pin plug plugged in on the rear of the screen? That's the usual reason for no maps.
CD is in. & I get audio directions & arrows on screen etc.
But the 12 pin plug ? is that a dash out job to get to it?
TIA Al :y
-
Yep, speedo binnacle out as per guide.
-
Sorry to jump in, but if you unplug the display (gid in my case) to remove the binnacle, does any procedure have to be followed for it to work again ? I had mine out today (in the breaker) and when I put it back there is no display and no sound.The head unit is working, but nothing else seems to. It may be unconnected as I have removed /unplugged a lot of electrical items recently, so I may have disturbed something without realising. :-/
-
VXL V6 -Just thought - mine has a 2013 - thinking maybe is it just the 2015 that has the all singing / dancing set up with maps ?
not a clue me on this stuff really - so glad this forum is here :-[ :-[ :-[
Sat nav seems to work as it did my old mini facelift elite
But lets hope it's the 12 pin plug - took dash out on old car -so should be OK :D :D :D
Apologies if this question is stupid -- but i just don't Know ::) ::) ::)
-
2013/15 will both do full maps if you have a CID screen
-
Sorry to jump in, but if you unplug the display (gid in my case) to remove the binnacle, does any procedure have to be followed for it to work again ? I had mine out today (in the breaker) and when I put it back there is no display and no sound.The head unit is working, but nothing else seems to. It may be unconnected as I have removed /unplugged a lot of electrical items recently, so I may have disturbed something without realising. :-/
Is the 36 Way ISO lead pushed fully home? They can become detached from the cage.
-
2013/15 will both do full maps if you have a CID screen
Thanks VXL V6 --- Dash out then to have a look. ::) ::)
Anything I should not unplug while doing it - or just follow the guide from on here - don't want to cause more problems :-[ :-[
-
CID fully working but no map display is the 12 pin plug as VXL V6 says.
CID with a permenent white screen, irrespective of function, is a shagged CID
-
CID fully working but no map disp[/highlight]lay is the 12 pin plug as VXL V6 says.
CID with a permenent white screen, irrespective of function, is a shagged CID
CID is working fine but just no maps TB :y :y
Dash out to have a look - :y 12 pin I hope
-
Sorry to jump in, but if you unplug the display (gid in my case) to remove the binnacle, does any procedure have to be followed for it to work again ? I had mine out today (in the breaker) and when I put it back there is no display and no sound.The head unit is working, but nothing else seems to. It may be unconnected as I have removed /unplugged a lot of electrical items recently, so I may have disturbed something without realising. :-/
Is the 36 Way ISO lead pushed fully home? They can become detached from the cage.
Yep, checked that. It isnt in the cage, thats gone. it just sits in the recess where the cage was. :-/
Sorry again Al for the thread hijack. :-[
-
Sorry to jump in, but if you unplug the display (gid in my case) to remove the binnacle, does any procedure have to be followed for it to work again ? I had mine out today (in the breaker) and when I put it back there is no display and no sound.The head unit is working, but nothing else seems to. It may be unconnected as I have removed /unplugged a lot of electrical items recently, so I may have disturbed something without realising. :-/
Is the 36 Way ISO lead pushed fully home? They can become detached from the cage.
Yep, checked that. It isnt in the cage, thats gone. it just sits in the recess where the cage was. :-/
Sorry again Al for the thread hijack. :-[
]No probs Albs - think I am sorted on my enquiry :y :y :y
-
]Is the 12Pin plug plugged in on the rear of the screen? That's the usual reason for no maps.[/highlight]
Great joy - - ;D ;D ;D yep we now have maps in glorious colour. 8-) 8-)
It was indeed the 12 way - just as VXL V6 & TB said - not plugged in at all . :( :(
Quite straight forward job following the Oof guide getting clocks out, -bit fiddly actually getting plug in - but all done . Brill - thanks guys :y :y :y :y :y