Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: plym ian on 04 June 2011, 14:26:33
-
just brought 2 headlights complete with ballasts want to know if it is hard to wire in as mine are just standered light units any help would be greatful. ian :)
-
I assume you bought the ballast connectors with a short piece of loom with the Hid`s :question. If yes, swap your level motors onto the hid`s (plug & play), two wires from ballast connectors (should be brown & yellow), splice them into your existing loom that carries the dip beam connector.
-
I assume you bought the ballast connectors with a short piece of loom with the Hid`s :question. If yes, swap your level motors onto the hid`s (plug & play), two wires from ballast connectors (should be brown & yellow), splice them into your existing loom that carries the dip beam connector.
is that the bit that goes to the bulb :question
-
Nope. You need the connector & piece of loom that plugs into the ballast...........the bulb is fed from the ballast
(http://i190.photobucket.com/albums/z257/belisensis/hidplug1.jpg)
(http://i190.photobucket.com/albums/z257/belisensis/hidplug2.jpg)
-
didn't get that bit but have got an hid kit that the ballasts have gone. looks like that sort of connection so i'll try that. cheers ian :)
-
Tried the connector I had but didnt fit :( :(
-
Are the ones in my pic the correct connectors :question
-
They look like the right ones its just the ones I've got doesn't fit cause they are from an after market kit that i thought might fit
-
Fiver posted if you want them Ian
-
Ok pm me cheers rob :) :)
-
PM sent :)