Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: danzigfan on 01 July 2011, 20:40:15

Title: Improved CCR 600
Post by: danzigfan on 01 July 2011, 20:40:15

It took me 4 hours to do this, 3,5 for thinking and hoping, 30 minutes of work, but I did it and IT WORKS BEAUTIFULL! Aux input on ccr600

Title: Re: Improved CCR 600
Post by: danzigfan on 01 July 2011, 20:42:36

(http://s3d3.turboimagehost.com/t/7938348_IMAG0391.jpg) (http://www.turboimagehost.com/p/7938348/IMAG0391.jpg.html)

Title: Re: Improved CCR 600
Post by: Jimbob on 01 July 2011, 20:43:33

what exactly have you done?

Title: Re: Improved CCR 600
Post by: danzigfan on 01 July 2011, 20:51:54

I connected left audio signal, right and ground to an output pins of TEA0675 inside the radio (amplifier and dolby filter for cassette signal). Works beautifully, no extra cassette noise, clear sound

Title: Re: Improved CCR 600
Post by: danzigfan on 01 July 2011, 20:56:23

Didn't take more pictures of procedure couse I was too much into it. Made a hole into empty switch on the right put aux input into it, pulled the cabels from the radio and that's it

Title: Re: Improved CCR 600
Post by: Dave DND on 02 July 2011, 08:42:54

You could have saved a lot of trouble by going for the Blaupunkt 420 that already has a CD socket on the front

http://www.dndservices.co.uk/holden-420.html

Title: Re: Improved CCR 600
Post by: danzigfan on 02 July 2011, 09:53:36

Could...., but I prefer improvising if I can. And after all it's unique now :)

Title: Re: Improved CCR 600
Post by: TheBoy on 02 July 2011, 12:15:39

though probably impedence mismatches all over the place now ;)

Title: Re: Improved CCR 600
Post by: danzigfan on 02 July 2011, 12:23:41

Mp3's impedance output must be a bit higher because it's connected on amplifier's output (on input it would couse heavy distortion) but it works nice . Like originally made, really 8-)