Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: 51M0N on 27 July 2011, 10:17:29

Title: HID's....
Post by: 51M0N on 27 July 2011, 10:17:29

I'm thinking of getting a set for my dipped beam (H1)
I've never touched these before so its new to me. easy fit?

Title: Re: HID's....
Post by: cem_devecioglu on 27 July 2011, 13:22:33

if you wont use the original set (expensive) be sure to buy a set that doesnt give mid warning..

Title: Re: HID's....
Post by: 51M0N on 27 July 2011, 14:41:56

Quote

if you wont use the original set (expensive) be sure to buy a set that doesnt give mid warning..

My mid doesn't work anyway  :(

Title: Re: HID's....
Post by: RobG on 27 July 2011, 15:22:30

Quote

I'm thinking of getting a set for my dipped beam (H1)
I've never touched these before so its new to me. easy fit?

Yep. Source a pair of pre-face HID`s from a breaker complete with ballast pack (bulbs if poss) plus the connector and short piece of loom that goes to the ballast. just a case of fitting the HID`s on yours, splice the two wires from ballast plug (yellow & brown) into the existing same colours on your dipped beam plug, fit your level motors into the HID`s (plug & play). As you`ve already got H/L washers fitted.........job done

Title: Re: HID's....
Post by: 51M0N on 27 July 2011, 15:31:40

I just noticed a complete h1 kit on teabay and thought id ask before buying  :D

Title: Re: HID's....
Post by: RobG on 27 July 2011, 16:25:25

Quote

I just noticed a complete h1 kit on teabay and thought id ask before buying  :D

MOT failure from 2012

Title: Re: HID's....
Post by: 51M0N on 27 July 2011, 16:27:16

Wont be a problem.

Whats wrong with H1 bulbs though?