Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: olzz on 14 August 2011, 21:20:25

Title: Omega 2001-electrical harnesses
Post by: olzz on 14 August 2011, 21:20:25
Im starting on the project, to add some electrical accessories to my Opel Omega 2001. Therefore I need specialist confirmation if FL models have harness ready for:
-Making rear windows electric. Only electrical mechanisms needed for the doors and new electrical switch module to the front door?
- Rear reading lights- Just adding the lamp module to the hanger on each side?
- Front sunshade /make-up lamps. Requires just switching the new sunshades with lamps.

If anyone has experience with such project, then thanks for the info in advance.

//Olari
Title: Re: Omega 2001-electrical harnesses
Post by: RobG on 14 August 2011, 21:30:52
Rear windows. You need the rear door looms, window motors, doorcards, switches for rears and driver`s doors and the loom from the donor driver`s door.
Rear lights, you need the loom from the light to bottom of door pillar off donor car.
Sunshades, loom may be tucked under headlining.
Title: Re: Omega 2001-electrical harnesses
Post by: twiglet on 14 August 2011, 22:00:15
And I've got all those bits available for you to buy if you want them!  :y
Title: Re: Omega 2001-electrical harnesses
Post by: olzz on 22 August 2011, 21:48:31
RobG! Do you know where are the closest connection points for those rear door looms? The central door/window module on the right side of the gas pedal?

I have the Opel Omega, but the donor car is Vauxhall Omega. Not sure, if those wires can plug-and-play...?


Thanks,
Olari

Title: Re: Omega 2001-electrical harnesses
Post by: TheBoy on 22 August 2011, 21:55:53
Behind the trim on above the lower seatbelt mounting
Title: Re: Omega 2001-electrical harnesses
Post by: olzz on 16 September 2011, 21:05:16
Gents!

I have instlalled now the new door loom for driver door. And also connected(just for test purposes) the new rear door loom and motor to the connector, found in the lower seatbelt mounting.
The new door switch module was not moving the rear window motor. The front windows were working OK.

Does anybody know if some software activation is required for having rear electric windows working? Or relay/fuse missing               

Thanks,
Olari