Omega Owners Forum

Omega Help Area => Omega Electrical and Audio Help => Topic started by: Blackie_No1 on 29 September 2011, 03:50:27

Title: ECC instructions
Post by: Blackie_No1 on 29 September 2011, 03:50:27
So, just got my FL elite and have no idea how to use the ecc, anyone help?
Title: Re: ECC instructions
Post by: Andy B on 29 September 2011, 09:03:07
Quote from: Blackie_No1 on 29 September 2011, 03:50:27
So, just got my FL elite and have no idea how to use the ecc, anyone help?

Please read the manual  ;) ;) ;) ;)  :y

http://images.omegaowners.com/documents/UserGuides/OmegaOct2002.pdf page 126
Title: Re: ECC instructions
Post by: Osprey on 29 September 2011, 12:05:20
Is that Read The Facelift Manual, Andy?  ;)

In my case, several pages of instructions can be boiled down to:
 1 - set it to auto
 2 - dial in a temperature that suits you
 3 - er... that's it!

Title: Re: ECC instructions
Post by: Dave DND on 29 September 2011, 12:07:40
Quote
Read The Facelift Manual

 ;D
Title: Re: ECC instructions
Post by: Blackie_No1 on 29 September 2011, 14:26:49
Quote from: Andy B on 29 September 2011, 09:03:07
Quote from: Blackie_No1 on 29 September 2011, 03:50:27
So, just got my FL elite and have no idea how to use the ecc, anyone help?

Please read the manual  ;) ;) ;) ;)  :y

http://images.omegaowners.com/documents/UserGuides/OmegaOct2002.pdf page 126

I don't have a manual hence me asking the "experts"
Title: Re: ECC instructions
Post by: Andy B on 29 September 2011, 15:49:30
Quote from: Blackie_No1 on 29 September 2011, 14:26:49
Quote from: Andy B on 29 September 2011, 09:03:07
Quote from: Blackie_No1 on 29 September 2011, 03:50:27
So, just got my FL elite and have no idea how to use the ecc, anyone help?

Please read the manual  ;) ;) ;) ;)  :y

http://images.omegaowners.com/documents/UserGuides/OmegaOct2002.pdf page 126

I don't have a manual hence me asking the "experts"

You do  ;)
http://images.omegaowners.com/documents/UserGuides/OmegaOct2002.pdf
Title: Re: ECC instructions
Post by: Blackie_No1 on 29 September 2011, 16:57:05
In that case mine is wrecked! Only blows out warm air from the drivers side :(
Title: Re: ECC instructions
Post by: Andy B on 29 September 2011, 16:59:42
Quote from: Blackie_No1 on 29 September 2011, 16:57:05
In that case mine is wrecked! Only blows out warm air from the drivers side :(

In which case, this might be of use.  :y :y
Title: Re: ECC instructions
Post by: RobG on 29 September 2011, 17:50:09
Quote from: Andy B on 29 September 2011, 16:59:42
Quote from: Blackie_No1 on 29 September 2011, 16:57:05
In that case mine is wrecked! Only blows out warm air from the drivers side :(

In which case, this might be of use.  :y :y
You mean this Andy
http://www.omegaowners.com/forum/index.php?topic=90575.0
Title: Re: ECC instructions
Post by: Andy B on 29 September 2011, 18:37:14
Quote from: RobG on 29 September 2011, 17:50:09
Quote from: Andy B on 29 September 2011, 16:59:42
Quote from: Blackie_No1 on 29 September 2011, 16:57:05
In that case mine is wrecked! Only blows out warm air from the drivers side :(

In which case, this might be of use.  :y :y
You mean this Andy
http://www.omegaowners.com/forum/index.php?topic=90575.0

 ;D ;D ;D Ooops!
I looked up the link, but forgot to paste it!  ::) ::) ::) ::)
Title: Re: ECC instructions
Post by: Blackie_No1 on 29 September 2011, 18:58:46
Cheers Andy/Rob! ;y

Common flaw then?
Title: Re: ECC instructions
Post by: Blackie_No1 on 30 September 2011, 12:08:36
My car seems to be awkward. That little arm is attached and is moving. Further "testing" would show that I get heat from the feet vents and cold air through the upper passenger side vent, low heat fromthe drivers side upper vent :?
Title: Re: ECC instructions
Post by: Blackie_No1 on 01 October 2011, 01:23:56
 Is it possible that the flap linkage is broke? I assume there is one for each side hence why one side is cold and the other isn't?  As I said it seems to be connected to the motor fine
Title: Re: ECC instructions
Post by: Blackie_No1 on 19 October 2011, 16:57:56
Anyone?
Title: Re: ECC instructions
Post by: TheBoy on 19 October 2011, 19:46:25
Each side has a blend flap. It could be that this isn't working (servo/rod/mechanism), or the temp sensors are saying its already too hot that side (set to HI - that overrides sensors)
Title: Re: ECC instructions
Post by: Blackie_No1 on 23 October 2011, 12:49:27
Quote from: TheBoy on 19 October 2011, 19:46:25
Each side has a blend flap. It could be that this isn't working (servo/rod/mechanism), or the temp sensors are saying its already too hot that side (set to HI - that overrides sensors)

The problem is that the drivers side is only ever warm, how do I get at the servo that controls the drivers side blend flap?