Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: tunnie on 09 March 2008, 11:18:44

Title: part number required....
Post by: tunnie on 09 March 2008, 11:18:44
an odd one... i need the part number for those little plastic clips that hold the standard Omega floor mats down.

2 for drivers side, 2 for passenger.
Title: Re: part number required....
Post by: TheBoy on 09 March 2008, 11:25:02
Quote
an odd one... i need the part number for those little plastic clips that hold the standard Omega floor mats down.

2 for drivers side, 2 for passenger.
Now I know you have EPC ;)

But as its a dealer only part, you'll have to go to them, and they will know.

Do you need the clips or the bits that are cut in to the carpet?
Title: Re: part number required....
Post by: tunnie on 09 March 2008, 11:26:17
Quote
Quote
an odd one... i need the part number for those little plastic clips that hold the standard Omega floor mats down.

2 for drivers side, 2 for passenger.
Now I know you have EPC ;)

But as its a dealer only part, you'll have to go to them, and they will know.

Do you need the clips or the bits that are cut in to the carpet?

Already got the clips in the floor carpet, i need the clips for the matts.

They don't have the holes for them, so will need to make them.

Drivers side one keeps sliding forwards in mine.
Title: Re: part number required....
Post by: TheBoy on 09 March 2008, 11:39:30
Quote
Quote
Quote
an odd one... i need the part number for those little plastic clips that hold the standard Omega floor mats down.

2 for drivers side, 2 for passenger.
Now I know you have EPC ;)

But as its a dealer only part, you'll have to go to them, and they will know.

Do you need the clips or the bits that are cut in to the carpet?

Already got the clips in the floor carpet, i need the clips for the matts.

They don't have the holes for them, so will need to make them.

Drivers side one keeps sliding forwards in mine.
IIRC, they come in packs of 4.  My tractor needs them as well, but no clips in floor :(
Title: Re: part number required....
Post by: Entwood on 09 March 2008, 17:34:02
Stealing the thread slightly ...  is it possible to retro-fit both bits ??

I don't have the bits in the carpet .. and the mats in this one move all over the place, so I'd like to fit both parts to nail the buggers down !!

If it is possible part numbers would be really helpful .......   :)
Title: Re: part number required....
Post by: tunnie on 09 March 2008, 17:45:00
Quote
Stealing the thread slightly ...  is it possible to retro-fit both bits ??

I don't have the bits in the carpet .. and the mats in this one move all over the place, so I'd like to fit both parts to nail the buggers down !!

If it is possible part numbers would be really helpful .......   :)

yes, the holes will be in the chassis, just need to make the hole in the carpet!
Title: Re: part number required....
Post by: markey mark on 09 March 2008, 17:53:12
Quote
Quote
Quote
Quote
an odd one... i need the part number for those little plastic clips that hold the standard Omega floor mats down.

2 for drivers side, 2 for passenger.
Now I know you have EPC ;)

But as its a dealer only part, you'll have to go to them, and they will know.

Do you need the clips or the bits that are cut in to the carpet?

Already got the clips in the floor carpet, i need the clips for the matts.

They don't have the holes for them, so will need to make them.

Drivers side one keeps sliding forwards in mine.
IIRC, they come in packs of 4.  My tractor needs them as well, but no clips in floor :(

i have a shed load jaime pm me your address and will pop a set in post for ya matey :y
Title: Re: part number required....
Post by: Albatross on 09 March 2008, 19:10:26
Quote
Quote
Stealing the thread slightly ...  is it possible to retro-fit both bits ??

I don't have the bits in the carpet .. and the mats in this one move all over the place, so I'd like to fit both parts to nail the buggers down !!

If it is possible part numbers would be really helpful .......   :)

yes, the holes will be in the chassis, just need to make the hole in the carpet!

I need to do this too; I have exactly the same problem.

If there are any going about then I'd happily pay the going rate + p&p.

Entwood, what are you plans for making the holes so they don't fray/fuzzup at the edges?
Title: Re: part number required....
Post by: Entwood on 09 March 2008, 21:49:09
Markey ... is it a shed full of floor bits or mat bits you have ??  or both !!

either way .. I'll willing buy 8 of each .. or whatever you have !!!!!!

Albatross ... until I see the bits I'm not certain ... hopefully the way they fix will prevent fraying .......  :(
Title: Re: part number required....
Post by: Albatross on 09 March 2008, 22:19:56
Quote
Markey ... is it a shed full of floor bits or mat bits you have ??  or both !!

either way .. I'll willing buy 8 of each .. or whatever you have !!!!!!

Albatross ... until I see the bits I'm not certain ... hopefully the way they fix will prevent fraying .......  :(

Do you need 8 for a car then? Or are you doing 2 cars?

If there are enough left, I only need enough for 1 car. I appreciate and accept my place in the queue though.

Title: Re: part number required....
Post by: Entwood on 09 March 2008, 22:35:30
I believe its 4 per mat .... might be wrong .. :(
Title: Re: part number required....
Post by: Taxi_Driver on 09 March 2008, 22:41:59
Quote
Quote
an odd one... i need the part number for those little plastic clips that hold the standard Omega floor mats down.

2 for drivers side, 2 for passenger.
Now I know you have EPC ;)

But as its a dealer only part, you'll have to go to them, and they will know.

Do you need the clips or the bits that are cut in to the carpet?

In that case.......look it up yourself tunnie......lazy git  ::) ;D
Title: Re: part number required....
Post by: Albatross on 09 March 2008, 23:43:35
I've just seen these mats (http://cgi.ebay.co.uk/vauxhall-omega-tailored-car-mats-grey_W0QQitemZ200204673490QQihZ010QQcategoryZ36678QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)

They seem to only have a single clasp at the back of the mat on the driver's side front.

Is there an easy way to clasp your mat here if you don't have the holes already in your carpets?

I like this idea because the clip wll be largely out of site if it is single and that far back.

(http://pics2.spoonfeeder.com/AieFTPFiles/AIEUser/R2U6ARR39ZJF/VYC2W9P7YQ8P.jpg)

Title: Re: part number required....
Post by: TheBoy on 10 March 2008, 10:56:09
Quote
I believe its 4 per mat .... might be wrong .. :(
Normally 2 per mat, though never seen clips on rear. Generally, on drivers seems to have them, occasionally passenger....
Title: Re: part number required....
Post by: Entwood on 10 March 2008, 14:33:36
Quote
Quote
I believe its 4 per mat .... might be wrong .. :(
Normally 2 per mat, though never seen clips on rear. Generally, on drivers seems to have them, occasionally passenger....


okies .. thanks for that .. so at least 2 possibly 4 needed , both mat and floor bits if anyone knows where or part numbers ??


:)
Title: Re: part number required....
Post by: TheBoy on 10 March 2008, 14:39:35
SET, MOUNTING PARTS, CARPET MAT (CONTAINS 4 CLIPS)    90397444
Title: Re: part number required....
Post by: tunnie on 10 March 2008, 14:51:07
Quote
SET, MOUNTING PARTS, CARPET MAT (CONTAINS 4 CLIPS)    90397444

The set of 4? is that 2 for the floor carpet, and 2 for the matt?

Or 2 sets of matt only clips?
Title: Re: part number required....
Post by: TheBoy on 10 March 2008, 15:04:27
Quote
Quote
SET, MOUNTING PARTS, CARPET MAT (CONTAINS 4 CLIPS)    90397444

The set of 4? is that 2 for the floor carpet, and 2 for the matt?

Or 2 sets of matt only clips?
No idea - my reading of EPC is 4 complete clips, ie 4 carpet bits and 4 clips.

Title: Re: part number required....
Post by: Entwood on 10 March 2008, 15:36:36
Many thanks ..  noted  :) ...  just wonder what the stealers will make of that number !!!  :)
Title: Re: part number required....
Post by: tunnie on 10 March 2008, 15:40:25
Quote
Quote
Quote
SET, MOUNTING PARTS, CARPET MAT (CONTAINS 4 CLIPS)    90397444

The set of 4? is that 2 for the floor carpet, and 2 for the matt?

Or 2 sets of matt only clips?
No idea - my reading of EPC is 4 complete clips, ie 4 carpet bits and 4 clips.


Just run the Banbury stealer, not in stock order in.

Ordered a couple of sets, should be in Wednesday  :)
Title: Re: part number required....
Post by: TheBoy on 10 March 2008, 18:53:51
Quote
Quote
Quote
Quote
SET, MOUNTING PARTS, CARPET MAT (CONTAINS 4 CLIPS)    90397444

The set of 4? is that 2 for the floor carpet, and 2 for the matt?

Or 2 sets of matt only clips?
No idea - my reading of EPC is 4 complete clips, ie 4 carpet bits and 4 clips.


Just run the Banbury stealer, not in stock order in.

Ordered a couple of sets, should be in Wednesday  :)
Did you order then in my name - might be able to get them picked up...
Title: Re: part number required....
Post by: tunnie on 10 March 2008, 19:05:19
Quote
Quote
Quote
Quote
Quote
SET, MOUNTING PARTS, CARPET MAT (CONTAINS 4 CLIPS)    90397444

The set of 4? is that 2 for the floor carpet, and 2 for the matt?

Or 2 sets of matt only clips?
No idea - my reading of EPC is 4 complete clips, ie 4 carpet bits and 4 clips.


Just run the Banbury stealer, not in stock order in.

Ordered a couple of sets, should be in Wednesday  :)
Did you order then in my name - might be able to get them picked up...

Yes ordered in the 'special' name  :)
Title: Re: part number required....
Post by: TheBoy on 10 March 2008, 19:08:39
Quote
Quote
Quote
Quote
Quote
Quote
SET, MOUNTING PARTS, CARPET MAT (CONTAINS 4 CLIPS)    90397444

The set of 4? is that 2 for the floor carpet, and 2 for the matt?

Or 2 sets of matt only clips?
No idea - my reading of EPC is 4 complete clips, ie 4 carpet bits and 4 clips.


Just run the Banbury stealer, not in stock order in.

Ordered a couple of sets, should be in Wednesday  :)
Did you order then in my name - might be able to get them picked up...

Yes ordered in the 'special' name  :)
I'll see if I can sweet talk a Bagus Horriblus into popping in and picking them up...   ...if I have a black eye next time I see you, you'll have to pick them up yourself ;D