Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: mick-1975 on 16 October 2011, 18:01:24

Title: wanted flexi for exhaust
Post by: mick-1975 on 16 October 2011, 18:01:24

hi im after a flexi joint for a 2.2 estate exhaust as mine is broke .
 Anyone know where i acn get one from instead of buying a complete front down pipe please..

     Mick  :y

Title: Re: wanted flexi for exhaust
Post by: albitz on 16 October 2011, 18:06:15

Ebay.It will then need to be welded on to your existing pipe afaik. ;)

Title: Re: wanted flexi for exhaust
Post by: RobG on 16 October 2011, 21:17:39

http://cgi.ebay.co.uk/Exhaust-Flexi-Pipe-Joint-100mmx51mm-Weld-on-Flexible-/150430552937?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item23065c1369#ht_2344wt_1139

Title: Re: wanted flexi for exhaust
Post by: Radar on 16 October 2011, 21:54:40

Quote from: RobG on 16 October 2011, 21:17:39

http://cgi.ebay.co.uk/Exhaust-Flexi-Pipe-Joint-100mmx51mm-Weld-on-Flexible-/150430552937?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item23065c1369#ht_2344wt_1139

If you go for the above double check that it is the flexi that is 100mm long and not the overall unit :y

Title: Re: wanted flexi for exhaust
Post by: RobG on 16 October 2011, 22:02:47

Quote from: Radar on 16 October 2011, 21:54:40

Quote from: RobG on 16 October 2011, 21:17:39

http://cgi.ebay.co.uk/Exhaust-Flexi-Pipe-Joint-100mmx51mm-Weld-on-Flexible-/150430552937?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item23065c1369#ht_2344wt_1139

If you go for the above double check that it is the flexi that is 100mm long and not the overall unit :y

It is

Title: Re: wanted flexi for exhaust
Post by: car-nut on 23 October 2011, 19:46:41

I had the same problem, it is much easier and better to replace the cat, I just got one from Eurocarparts for £108 delivered with there current 25% off.

Title: Re: wanted flexi for exhaust
Post by: Ken T on 25 October 2011, 23:03:53

It can be done,   http://www.omegaowners.com/forum/index.php?topic=43028.msg649121#msg649121

Only make sure you bolt the whole exhaust together before welding, otherwise it might be a bit misaligned, and once welded impossible to straighten.

I didn't  :'( :'( :'(

Ken