Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: jsp225 on 28 October 2011, 13:30:15

Title: EML flashes at high revs then engine runs lumpy help!!!!
Post by: jsp225 on 28 October 2011, 13:30:15
Hi Guys

My 3.2 v6 auto lpg has the EML on all the time, if I reset the ECU it comes back after 30miles or so, lately giving it some beans up the A5 the EML light flashed I lost all power and the engine sounded like it was running on three cylnders. :( I pulled over disconnected the battery for five mins, after that it was ok then it happened again when i put my foot down at high revs. Any help would be much appreciated. :)

Cheers

Jay
Title: Re: EML flashes at high revs then engine runs lumpy help!!!!
Post by: aaronjb on 28 October 2011, 13:43:55
You need to check the fault code - without that, anyone who answered would just be guessing blindly :)

How to check the codes is here - http://www.omegaowners.com/forum/index.php?topic=90581.0
Title: Re: EML flashes at high revs then engine runs lumpy help!!!!
Post by: jsp225 on 30 October 2011, 13:35:01
Hi I just got my op_com, codes read as follows P1870 (2) torque converter clutch stuck off,
P0420 and P0430 Active was catalyst system below threshold bank 2.

Cheers