Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: duke101 on 08 November 2011, 17:05:43
-
Will Solus Pro reset Omega airbag warning light...if so how please. I have borrowed one but cant find any reference to the SRS ....of course i may not be using it correctly.
-
Snap-off shite normally doesn't
-
Snap-off shite normally doesn't
yes it does :y,although saying that I've never checked if will do an Omega :-[,it does do every other Vauxhall that I've tried it on though ???
-
Snap-off shite normally doesn't
yes it does :y
Must admit, I thought the Solus Pro was supposed to :-\
Mind you... From experience, sometimes they say it will but it won't ::)
-
Snap-off shite normally doesn't
yes it does :y
Must admit, I thought the Solus Pro was supposed to :-\
Mind you... From experience, sometimes they say it will but it won't ::)
I'm sure it does but will check in the morning when at work :y
-
Cheap fleabay chinese shite does. :)
-
Cheap fleabay chinese shite does. :)
:-[ :-[ :-[ :-[ :-X
-
If Solus Pro wont do this which is the best Chinese type code reader to do this and other jobs ?
-
no links to pirate hard/software please :y
-
If Solus Pro wont do this which is the best Chinese type code reader to do this and other jobs ?
Just search on that well known auction site for "Vauxhall Code Reader" ;)
no links to pirate hard/software please :y
I think the wording above is OK, if not, just delete please JB :y
-
Just checked my solus pro,inputted 3.2 omega and airbag is listed so don't know whats occuring there.
Edit- duke 101 could you access the air bag fault codes or was that you could not delete them?
-
Cheap fleabay chinese shite does. :)
I concur! ;) ;) :y
-
duke101, pm sent :y
-
Sorted now thank you all ... the Solus Pro does clear the airbag warning light , all down to operator error
-
Ah, I was thinking of the older snap-off, my bad. I know that doesn't, as one of the local garages occasionally calls me for various Tech2 resets. They have the GM 'module' for it, but it only seems to do drivetrain.
-
Ah, I was thinking of the older snap-off, my bad. I know that doesn't, as one of the local garages occasionally calls me for various Tech2 resets. They have the GM 'module' for it, but it only seems to do drivetrain.
My old Mt2500 snappy used plug in modules, the Solus pro carrys all info onboard which is updated every few months (at fair cost :'()