Omega Owners Forum
Omega Help Area => Omega Electrical and Audio Help => Topic started by: encino on 14 November 2011, 17:45:56
-
After removing the non working head unit from my F/L CDX to fit a good one, I find that the antenna plug has become detached from the back of the cage. Whats the best way to get access to clip it back in?
Regards.
-
Take cage out.
Be very careful NOT to distort cage
-
Cheers for that. What actually holds the cage in place, are there clips or is it just a tight push fit?
-
Cheers for that. What actually holds the cage in place, are there clips or is it just a tight push fit?
The cage at the very edges on the sides and the front just lightly clip behind the plastic - look and you will see.
The key, is when pulling out, if it comes about an inch, then stops, thats it catching on the top near the back (use a torch, you will see. My solution to this is a think plastic strip to easy it past that point. Just yanking will distort cage.
-
i thought that the cages were designed to 'fold' in at the top thus making it very easy to remove :-\ :-\
ummm we are talking about the metal cage arent we :-[