Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: tango on 09 December 2011, 15:52:46

Title: WTD rear shocker
Post by: tango on 09 December 2011, 15:52:46
wanted
driver side rear shocker for 2.6 elite
with self levelling
are they cheap new or is used best option
Title: Re: rear shocker
Post by: twiglet on 09 December 2011, 16:03:57
IIRC they are only available from Vxl new, and are £160ish  :o

You may be lucky and find one S/H, but you can never know how long it will last.  :-\
Title: Re: rear shocker
Post by: albitz on 09 December 2011, 17:29:00
Best to replace in pairs if at all possible,although realistically,many people are on a tight budget these days.
Title: Re: rear shocker
Post by: tango on 09 December 2011, 19:16:25
thanks for the replies
"tight budget" definitly
but has any body got any decent second hand or can i put standard shocks in
Title: Re: rear shocker
Post by: albitz on 09 December 2011, 19:36:05
You couldpull he fuse from the self levelling and use standard shocks.Problem then may be that the S/L springs may be too soft,so you need a pair of non S/L springs also.
Title: Re: rear shocker
Post by: albitz on 09 December 2011, 19:36:37
You could pull the fuse from the self levelling and use standard shocks.Problem then may be that the S/L springs may be too soft,so you need a pair of non S/L springs also.
Title: Re: rear shocker
Post by: bored bigyin54 on 09 December 2011, 20:05:35
that was done with mine and it was to soft so put self raising back on
Title: Re: rear shocker
Post by: bored bigyin54 on 09 December 2011, 20:08:06
i think i had the last second hand shocks on here
Title: Re: rear shocker
Post by: twiglet on 09 December 2011, 21:26:09
I can probably sort you out with a set of nearly new non-s/l shocks and matched springs if you need them mate.  :y
Title: Re: rear shocker
Post by: tango on 11 December 2011, 07:52:52
thanks for the replies guys
i think ill stick to the self leveling setup

twiglet how much do you want
Title: Re: WTD rear shocker
Post by: twiglet on 12 December 2011, 18:58:09
Tango, if you want to stick to the S/L setup, then I can't help you mate.  All the sets I have here are non-S/L.   :(