Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: fcc-pt on 16 December 2011, 14:11:29
-
Hi,
How can I stop a small leak at the radiator fan switch?
Wich product should I use, does some kind of teflon tape will do the job?
Thank you.
-
New sealing washer would be the best imagine. ;)
-
the fan switch doesn't have the proper structure to fit a seal.
-
as sugested change sealing washer,from looking at other switches it screws into the rad,if you havnt got a sealing washer,use some ptfe tape,but not to much tho.
-
as sugested change sealing washer,from looking at other switches it screws into the rad,if you havnt got a sealing washer,use some ptfe tape,but not to much tho.
Thank you, ptfe tape is the same as teflon tape right?
-
as sugested change sealing washer,from looking at other switches it screws into the rad,if you havnt got a sealing washer,use some ptfe tape,but not to much tho.
Thank you, ptfe tape is the same as teflon tape right?
Similar qualities :)
-
I think from the factory these switches were sealed with a plain copper washer, but if you try to buy that now from Vx you will be sold a Dowty washer.
(http://www.malcleanse.co.uk/lg_images/Dowty_Type_Bonded_Seal_Washer_Stainless_Steel_DWSS38.jpg)
-
I think from the factory these switches were sealed with a plain copper washer, but if you try to buy that now from Vx you will be sold a Dowty washer.
One of many bits on the Omega where Vauxhall let the public do the product testing... ;)