Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: bored bigyin54 on 30 December 2011, 19:30:02
-
;D i think my 2.5 has a misfire could that be caused by a leakin camgasket :y :y :y :y
-
yes
-
;D still running ok just sounds funny :y :y :y :y
-
Pull a few plug leads Ralf and check for oil in the recesses where the plugs sit. ;)
-
;D just waiting for the rain to stop dont need car till wednesday so gives me a few days my son has got time then :y :y :y :y :y i think its the one i had done 5 mts ago :y :y
-
;D going to have a go at it on monday seems a dry day fingers crossed :y :y
-
;D anyone fancy doing it for me its freezing out there :y :y :y :y :y :y
-
;Dhow do you get the wire tray out of the way got everything lose but cat move the tray out off the way >:( >:( >:( >:(
-
;D it was oil in the plug wells and it was a cow to get out :y :y :y :y
-
;D well it is no go plug well are filling up again :y :y :y the guy who done it done a s~~t job wasted my money :y :y
-
;D well it is no go plug well are filling up again :y :y :y the guy who done it done a s~~t job wasted my money :y :y
Ask for your money back or get them to re do it ...better still get your money back and do it yourself mate :y
Not that hard just fiddly .
-
wont let him touch it again found a good guy to do it dont know when yet
-
wont let him touch it again
Was this the garage that looked at the leak for you too?
found a good guy to do it dont know when yet
I've just picked up your messages mate. Sorry it's taken me a day to get back to you, I've been flat out lately.
Whilst I'm happy to help - given the likely delay in us being able to fix a date, it may be best to PM Darth/Wellung to see if they could do it sooner? :y
-
Well I'm without employ at the moment so I can fit you in anytime ;) :y
-
any time you want james got plenty off time
-
Well I'm without employ at the moment so I can fit you in anytime ;) :y
i didnt ignore you i sent you a pm sorry ralf
-
I just realised and replied ;D ::)
-
>:( still got crap tick over >:(
-
>:( should have said help still got crap tick over its doing my head in >:(
-
Have you had your cam cover gasket done? I trust this is the cause?
-
no not yet am waiting for someone to get back to me did take the oil out off the plug well i think its full again
-
no not yet am waiting for someone to get back to me did take the oil out off the plug well i think its full again
it will do mate. get it done asap as it will do your leads in after a while. i beliebve :y
-
>:( i think it already has but cant do nothing until gasket is done :(
-
>:( i may give up on it run it till it goes bang and then scrap it alltogether costing more money than its worth and wife is fed up with it going wrong >:(
-
is there anyone close to me who can do a cam gasket am willing to pay to have it done thanks
-
>:( i may give up on it run it till it goes bang and then scrap it alltogether costing more money than its worth and wife is fed up with it going wrong >:(
You tell the wife it's your wheels and you're keeping them. Otherwise you're gonna get all up in her make-up box innit :y
I'm sure one of the wizards on here can do it for thee :y :y :y :y :y :y
-
i can see her point since i got it it only cost money to keep it going
-
i can see her point since i got it it only cost money to keep it going
Every car does! ::)
-
>:( just had computer put on car it showed no faults slight miss on tick over so getting someone to look at it on tues or wednesday think it is plugs and leads
-
As soon as my mate gets my mig back to me i'll ask him to have a look at yours
-
:y ok derek :y :y :y :y
-
;D well its being done on saturday both camgaskets and cleaned up for £100 :y :y :y :y
-
;D well its being done on saturday both camgaskets and cleaned up for £100 :y :y :y :y
Hope that using genuine gaskets!
-
yes he is a vx mechanic he has done many v6 cam gasket
-
my car has just gone to the doctors to have both cam gaskets done and new plugs keep my fingers crossed now
-
Hope you finally get it running properly Ralf. :y
-
:D i hope as well albert :y :y :y
-
well i need coil pack and leads now gaskets are done
-
its worse now than before had gasket done got a rattle now dont know were from
-
its worse now than before had gasket done got a rattle now dont know were from
Bigyin, has your friend who done the CCG changed spark plugs and replaced fubared leads and/or diss-pac if necessary?
-
done camgaskets changed plugs now dont pull at all worse than before it was done can that have anything to do with two middle breather pipe not pushed on tidy
-
Everything connected back up, ie. hoses/vac pipes and electrics?
-
its worse now than before had gasket done got a rattle now dont know were from
Strange i thought he was just doing the cam cover gaskets ???
-
i think he made a mess off the plug leads sounds like wrong fireing order
-
what is the fiering order on this
-
and webby my name is ralf
-
and webby my name is ralf
Cheers Ralf. I'm Steve :y
My PM limit has been exceeded for the moment however I'll buy this from you!
When my PM is up and running we'll talk dosh if you definitely want to sell it :y
-
what is the fiering order on this
Bulk head
5-0 0-6
3-0 0-4
1-0 0-2
Radiator
-
hi ralf
been reading through this and cant seem to fathom out what has been done???
you have had cam gaskets done?
new leads fitted?
new plugs fitted?
you now have a rattle and worse misfire?
when he done camgaskets did he clean the breathers out ? which is cause of gaskets going in first place
follow robG's lead diagram with new leads if all correct i would be looking at dispack if spark plugs are new aswell
check all vac pipes are back on and in correct order aswell
-
can admin please lock as i now sold car just got to fed up thanks fiend61
-
ahhhh ok :y
-
i think he made a mess off the plug leads sounds like wrong fireing order
Yep that sounds like a Vx mechanic thats done loads of V6 cam cover gaskets :) :) :) ;)
-
Locked as requested :y