Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Marks DTM Calib on 22 October 2006, 13:44:30
-
Just added this to the maintenance guide section....hope its useful (note I did this 1 hour before we had to go into hospital!).
Comments in this thread please!
I should add....its made a hell of a difference to the operation of my slipper diff.!
-
Looks good - shame piccies are a shade too wide, and hence horizontal scrolling on 1024 width screen (can you reduce piccies slightly?)
I believe my MV6 doesn't have LSD, is it still worth doing?
-
They were 800x600, have reduced them further.....
Its one of those jobs that I would recommend doing at about 100K miles on all cars....and as said 50K miles on an LSD setup
-
They were 800x600, have reduced them further.....
Its one of those jobs that I would recommend doing at about 100K miles on all cars....and as said 50K miles on an LSD setup
640 x 480, unless you need the extra detail ;)
So on my 135k car, I should consider doing it?
-
Its worth considering...sort of a rainy day job when you have an hour to kill.
Plus you will get to find out if you have an LSD or not once and for all!
-
Its worth considering...sort of a rainy day job when you have an hour to kill.
Plus you will get to find out if you have an LSD or not once and for all!
2 problems, firstly I'll get wet ;), secondly, I need to know which type before buying the fluid...
Somebody needs to host a g/box diff oil day....
-
Its worth considering...sort of a rainy day job when you have an hour to kill.
Plus you will get to find out if you have an LSD or not once and for all!
2 problems, firstly I'll get wet ;), secondly, I need to know which type before buying the fluid...
Somebody needs to host a g/box diff oil day....
Yeah, I might be interested in one of those. Otherwise not going to touch it. Elites don't have LSD do they?
-
They might have.....you could in theory simply use the LSD oil in a normal diff......it wont need the viscosity modifiers but....wont harm the rest of it.
-
All I'd suggest is slightly slacken the filler plug BEFORE undoing and draining anything
-
another on the esesentials list Mark - and one i will be using within days :y