Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: b4ndit on 07 February 2012, 22:07:00

Title: cambelt setting tool
Post by: b4ndit on 07 February 2012, 22:07:00
anyone know where to buy these from :)
Title: Re: cambelt setting tool
Post by: dan-eboy on 07 February 2012, 22:13:46
Do you mean this sort of thing?
http://www.supaprice.co.uk/p/result.jsp?ga=uk13&q=vauxhall+timing+tools
Bit pricey but still cheaper than paying someone else to do it!
Or try and borrow one for a decent drink?
Title: Re: cambelt setting tool
Post by: b4ndit on 07 February 2012, 22:19:14
that sort of thing but the one specific to the omega have timing tools at work but not the one for the omega and dont know anyone with one did do my 3.0 without one but better if i can get one just makes life a bit easier :y :y
Title: Re: cambelt setting tool
Post by: dan-eboy on 07 February 2012, 22:24:27
Yeah i did my first cambelt change on my 2.5 V6 omega.  It was scary sh*t even with the tools (which i borrowed) I would of been bricking it without, or might not even of attempted it.  Turning that key the first time i was holding my breath!
Do you need the little cam lockers or the crankshaft thing or both?
Title: Re: cambelt setting tool
Post by: b4ndit on 07 February 2012, 22:25:25
could do with both really :y
Title: Re: cambelt setting tool
Post by: dan-eboy on 07 February 2012, 22:29:27
http://www.mccormicktools.co.uk/product.php/site/froogle/sn/VSE130

This is cheapest one i've found, looks just like the set i used
Title: Re: cambelt setting tool
Post by: b4ndit on 07 February 2012, 22:33:45
that will do thanks :y :y
Title: Re: cambelt setting tool
Post by: andyc on 07 February 2012, 22:45:04
Hi Guys

First up is the V6 Locking from Sealey VSE130. RRP £111.95 (134.34 inc VAT). Special Offer Price £75.50 (£90.60 inc VAT)
http://www.sealey.co.uk/PLPageBuilder.asp?productdescription=vse130&pageindex=1&gotonode=DoProductSearch&method=mProductSearch&IndividualTypeID=&category=0&requiredresults=16

Belt Adjusting Spanners VS1301. RRP £63.45 (£76.14 inc VAT). Special Offer Price £25.58 (£30.71 inc VAT)
http://www.sealey.co.uk/PLPageBuilder.asp?productdescription=vs1301&pageindex=1&gotonode=DoProductSearch&method=mProductSearch&IndividualTypeID=&category=0&requiredresults=16

On Trade Club we are doing an Extra 10% off trade Club Prices on Timing Belt Kits and Brake Disc Kits

Plus with any of the above you'll get a free Trade Club Beanie Hat

Cheers
Andy
 
Title: Re: cambelt setting tool
Post by: ozzycat on 07 February 2012, 23:14:02
 :y :y that is a bloody good ricev from andyc  :y :y
Title: Re: cambelt setting tool
Post by: feeutfo on 07 February 2012, 23:35:10
It is, and gives further savings as the roller adjuster spanner is included. As is the Torx socket for the crank pulley. No other kit (I have seen) includes these two extra items.
Title: Re: cambelt setting tool
Post by: b4ndit on 07 February 2012, 23:50:37
Hi Guys

First up is the V6 Locking from Sealey VSE130. RRP £111.95 (134.34 inc VAT). Special Offer Price £75.50 (£90.60 inc VAT)
http://www.sealey.co.uk/PLPageBuilder.asp?productdescription=vse130&pageindex=1&gotonode=DoProductSearch&method=mProductSearch&IndividualTypeID=&category=0&requiredresults=16

Belt Adjusting Spanners VS1301. RRP £63.45 (£76.14 inc VAT). Special Offer Price £25.58 (£30.71 inc VAT)
http://www.sealey.co.uk/PLPageBuilder.asp?productdescription=vs1301&pageindex=1&gotonode=DoProductSearch&method=mProductSearch&IndividualTypeID=&category=0&requiredresults=16

On Trade Club we are doing an Extra 10% off trade Club Prices on Timing Belt Kits and Brake Disc Kits

Plus with any of the above you'll get a free Trade Club Beanie Hat

Cheers
Andy
 
whats the delivery charge for the kit and the garage i work at we are trade club members also what is the delivery time
many thanks
Title: Re: cambelt setting tool
Post by: MV6Danny on 08 February 2012, 02:27:30
Hi Guys

First up is the V6 Locking from Sealey VSE130. RRP £111.95 (134.34 inc VAT). Special Offer Price £75.50 (£90.60 inc VAT)
http://www.sealey.co.uk/PLPageBuilder.asp?productdescription=vse130&pageindex=1&gotonode=DoProductSearch&method=mProductSearch&IndividualTypeID=&category=0&requiredresults=16

Belt Adjusting Spanners VS1301. RRP £63.45 (£76.14 inc VAT). Special Offer Price £25.58 (£30.71 inc VAT)http://www.sealey.co.uk/PLPageBuilder.asp?productdescription=vs1301&pageindex=1&gotonode=DoProductSearch&method=mProductSearch&IndividualTypeID=&category=0&requiredresults=16

On Trade Club we are doing an Extra 10% off trade Club Prices on Timing Belt Kits and Brake Disc Kits

Plus with any of the above you'll get a free Trade Club Beanie Hat

Cheers
Andy
 
Where or how can i order one of these for this price. Already have the rest of the kit. Got a bargain off the bay second hand never used laser one for 50 squid :y
Cheers
Title: Re: cambelt setting tool
Post by: adey2 on 08 February 2012, 05:04:35
heres one on auction with no reserve     http://www.ebay.co.uk/itm/vauxhall-petrol-locking-and-setting-kit-v6-sykes-pickavant-bran-new-02300000-/200710237311?pt=UK_Diagnostic_Tools_Equipment&hash=item2ebb432c7f
Title: Re: cambelt setting tool
Post by: adey2 on 08 February 2012, 05:09:16
and heres one with the tool for tensioning belt    http://www.ebay.co.uk/itm/BERGEN-Professional-Engine-Petrol-Timing-Tool-Kit-V6-GM-and-Saab-3L-and-3-2L-/280725803780?pt=UK_Hand_Tools_Equipment&hash=item415c8fd304
Title: Re: cambelt setting tool
Post by: andyc on 08 February 2012, 14:31:46
whats the delivery charge for the kit and the garage i work at we are trade club members also what is the delivery time
many thanks

£6.00 delivery and a couple of days


Where or how can i order one of these for this price. Already have the rest of the kit. Got a bargain off the bay second hand never used laser one for 50 squid
Give us a call 01284 777254

Cheers
Andy



Title: Re: cambelt setting tool
Post by: TheBoy on 08 February 2012, 19:40:21
Given your location, worth PM'ing Elite Pete, see if will rent you the kit?
Title: Re: cambelt setting tool
Post by: b4ndit on 08 February 2012, 19:57:43
thanks for all the replies will crack on and see about buying or renting a kit :y :y
Title: Re: cambelt setting tool
Post by: Ken T on 08 February 2012, 20:47:17
I thought the roller adjusting spanner was simply a cranked 30mm spanner. I got one for £10.

Ken