Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: GT on 21 February 2012, 10:51:44

Title: Help - Water Pump
Post by: GT on 21 February 2012, 10:51:44

 :'(  took the water pump off, and forgot to mark where the new one should sit, any body there to give me a tip on how to position it correctly

Title: Re: Help - Water Pump
Post by: tunnie on 21 February 2012, 10:57:32

going from memory on my last cam belt, it can only go in one way?

Title: Re: Help - Water Pump
Post by: GT on 21 February 2012, 11:15:22

but you can move it about before tigtening it up, so the qestion is how is it orientated in the block

Title: Re: Help - Water Pump
Post by: tunnie on 21 February 2012, 11:19:34

mine had a lug in it....

(http://dl.dropbox.com/u/803897/Omega/2.2belt/DSC00329.JPG)

(http://dl.dropbox.com/u/803897/Omega/2.2belt/waterpump.jpg)

Title: Re: Help - Water Pump
Post by: GT on 21 February 2012, 11:22:23

mine too, looks the same, how is it positioned and also what touqe settings for the tensioner, pullys and big pully at the  bottom of engine ...?????? :'(

Title: Re: Help - Water Pump
Post by: GT on 21 February 2012, 12:17:02

anybody!!!!

torque settings for pullys and associated bolts for a cam belt change please

Title: Re: Help - Water Pump
Post by: tunnie on 21 February 2012, 12:57:52

either invest in a Haynes book or the highly rated 4pot cambelt DVD  :y

Don't know the torque figrues off hand....

Title: Re: Help - Water Pump
Post by: Abiton on 21 February 2012, 13:00:48

4-pot torque stuff:

http://www.omegaowners.com/forum/index.php?topic=90527.0

Edit: Only seems to cover crankshaft pulley bolts, not waterpump fixings or tensioner etc.

Title: Re: Help - Water Pump
Post by: RobG on 21 February 2012, 13:25:42

Quote from: GT on 21 February 2012, 12:17:02

anybody!!!!

torque settings for pullys and associated bolts for a cam belt change please

Waterpump lug @ app. 10 o/c position.
Waterpump bolts, 25Nm
Idler bolt, 25Nm
Tensioner bolt, 20Nm
Mounting bracket bolts, 25Nm

Title: Re: Help - Water Pump
Post by: PhilRich on 21 February 2012, 13:53:16

Hope this helps :y


(http://i863.photobucket.com/albums/ab197/philrich1064/ToothedBeltTensionCheck.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/ToothedBeltTensionCheck2of2.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/ToothedBeltTensionAdjustpage1of4.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/ToothedBeltTensionAdjustpage2of4.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/ToothedBeltTensionAdjustpage3of4.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/ToothedBeltTensionAdjustpage4of4.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/TimingCheck.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/TimingAdjustpage1of2.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/TimingAdjustpage2of2.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/RibbedV-BeltTensionCheck.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/RibbedV-BeltRemovalRefit.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines2of3.jpg)

(http://i863.photobucket.com/albums/ab197/philrich1064/Omega22TorqueGuidelines3of3.jpg)

Title: Re: Help - Water Pump
Post by: GT on 21 February 2012, 16:29:10

 :)

Managed to get done what i set out to do, although, i throw a shoe this morning, and forgot to take note of the position of the water pump.

I too had the list of torque seetings but could not find anything for the pullies, tensioner or the water pump.

I have the video of the cambelt change but they do not mention the torque settings or show clearly where to set the water pump.

However, i will get a Haynes manual Tunnie, if they do one for a 2001 Facelift.

Phil, the diagrames were just what i needed, thank you..

Many thanks to all that responed to my SOS  :y

Regards

GT :)