Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / 2.TD auto to manual conversion

« on: 19 September 2014, 22:32:19 »

Hi,

We would like to make a conversion to a 2001MY 2.5TD auto to manual transmission. The car is not mine, I just try to help my friend in the electrical things. There is a good how2 about conversion (I did my 3.0 petrol according this great manual without problem - http://www.omegaowners.com/forum/index.php?topic=90592.0) but now I don't know is there any difference in case of 2.5 TD diesel car?
Could somebody tell me are there any differencies if I want to use the electrical part of this description in case of diesel car or will this work also? - like in my case with the 3.0.
If somebody has already done this mod on a 2.5td please confirm me, or shortly post the differencies.
Thank you
Br
Zoli

ps. Does anybody live near to Hertfordshire? I want to ask something about a dealer who trade with damaged LHD cars.

2

Omega General Help / Black ECOTEC cover

« on: 04 March 2013, 15:25:41 »

Hi!

Is it possible to remove the full black ECOTEC label plastic cover from the to of the engine? I would like to clean some stuffs (ICV, throttle body) and I can't see screews at the rear side.That would be great if I wouldn't break something...
Tx
Zoli

3

Omega Electrical and Audio Help / Auto dimming mirror

« on: 08 October 2012, 23:00:10 »

Hi!

I have a auto dim mirror with 3 buttons on the left side of the bottom. Does anybody know waht is the function of these buttons? - electric gate opener? - any idea?
Thanks
Zoli

4

Omega Electrical and Audio Help / Display config on a radio

« on: 16 September 2012, 21:18:07 »

Hi!

Not Omega related question...
Does anybody know how does it possible config/set up the "display type" on the radio?I have a vdo 441 xed which was came from an Astra Mk3, when I put this into an astra Mk4 the dash dispaly (TID) doesn't show anything related to the radio function- any other functions are work, setup also is unavailable.
Is there a button combination on the radio whhich i press and the dash shows the information?
Tx
Zoli

5

Omega Electrical and Audio Help / Factory fitted alarm installation

« on: 21 February 2012, 21:16:56 »

Hi!

I'm planning to install the factory fitted alarm system into my Facelift Omega. As i know the next parts are needed for this:
Central locking controller from a car which was installed factory fitted alarm system
Interior light with the 2 sensors
2 keyfob
Power sounder and siren
Bonnet tamper
Alarm Switch

Can it cause proble if the central ECU and keys are coming from different car?
What kind of programming needed with TECH2?
What kind of problems can occur?
Thanks
Zoli

6

Omega Electrical and Audio Help / HPU NOKIA control unit location

« on: 08 September 2011, 21:18:22 »

Hi!

Does anybody know where can I find in my car the HPU5 Nokia handsfree control unit? Car has CCRT2008 inbuilt head unit. I haven't found behind the glovebox..or the right side foot part behind the panel.
Thanks
Zoli

7

Omega Electrical and Audio Help / NCDC 2013 mute connection

« on: 02 September 2011, 10:31:45 »

Hi!

Does anybody know is there a mute connection point on the NCDC2013 if I would like to install a handsfree kit?
Or do I have to turn down the radio volume button every time when I use the mobile?
Thanks
Zoli

8

Omega Electrical and Audio Help / CID display

« on: 14 August 2011, 17:13:14 »

Hi!

Does anybody have a CID display for sale (Omega, CS or KJ code on the back)? No problem if not dpaired correctly, and if LCD display is removed (without damage) that's also OK for me. Just must be work fine . . functionality.
Please PM me if somebody can help.
Thanks
Zoli

9

Omega Electrical and Audio Help / BOSE system installation

« on: 14 June 2011, 21:13:29 »

I would like to install a BOSE system to a facelift car tomorrow, the speakers, amp  and cable loom installation have already done. i need info where can i find a postive lead for the amp? The wiring diagram mentions F6, but there is no cable in it (both cables are missing from the place of F6)...so I can install 2 cables to that place but where can I connect the input 12V to the Fuse? (output is OK that will go to the amp through a 20A fuse)
I would be grateful for any idea or experience ..
Thanks

10

Omega Electrical and Audio Help / BOSE amp

« on: 17 April 2011, 20:37:23 »

Hi!

Does anybody has a BOSE amp for sale?Mine is elecrically faulty, I need the amp with BLUE connector (244 130 42). I've checked on ebay but if somebody has cheaper I would happy..
Thanks
Zoli

11

Omega Electrical and Audio Help / BOSE tweeters

« on: 30 August 2010, 11:13:15 »

Hi!

I would like to know that BOSE tweeters are the same or different in facelift saloon models? I would like to buy a set but the 2 tweeters are missing, only the 6 speakers are anailable (and also the cable, amplifier, etc..).
Tx
Br
Zoli

12

Omega Electrical and Audio Help / NCDC2013 removal - HELP!!

« on: 24 July 2010, 22:06:10 »

Hi!

I can't remove my double din NCDC2013 radio from my car. I used standard doube din radio removal tool, but the radio hasn't come out, it's moved a little bit but nothing more.I'm afraid I cant use the removal tool in case of this radio till it come out, because the pins on the radio which were plennad to the removal tool are already crooked.
Is there any idea how could I remove it?
Br
Zoli

13

Omega Electrical and Audio Help / Problems with CID

« on: 20 January 2010, 20:09:15 »

My Colour Info Display has almost died. Sometimes works sometimes not, very annoying... in Hungary it's difficult to find a replacement part. Is it possible to buy one from England?Any idea?

Anyway can I use a GID instead of CID? The head unit is a Siemens NCDC2013. If it's possible to use the GID is it needed to depair similar to CID??

If somebody has a relacement CID or GID don't hesitate to contact me...
tx
Zoli

14

Omega Electrical and Audio Help / Loom connector - cricle shaped behind battery

« on: 17 December 2009, 20:54:05 »

Hi!

Behind the battey there are circle shaped connectors.
Is it possible that the oxygen sensor signal wire goes throgh on these? As I know in case of V6 engines (2.5, 3.0) the oxygen sensor signal wires connect to the 28 and 47 pins to the ECU by a multi pin connector. But in my case there are no signal on the pin 28....
 The ECU connector is ok, not corroed or something. And pin 47 is also OK.
I need to know the O2 wire goes throgh on the cicle shaped connectors or not?if yes than which connector and pin should I examine?
Br
Zoli

15

Omega Electrical and Audio Help / Sunroof light

« on: 09 December 2009, 20:13:35 »

I've replaced the sunroof light bulb because it didn't work.Now if I start the car (so the engine is running)or turn the ignition on it always lights.Is it normal?I've thought it will work only if I turn on the headlamp switch....