Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

121

Omega General Help / ATWS

« on: 31 May 2014, 23:26:29 »

If I look with the Tech 2 into the ATWS there are a few extra options if it is a Saloon
Can anyone tell me what the special vehicle options are if you chose for the Police instead of other.

122

Omega Electrical and Audio Help / Re: Rear view camera

« on: 23 May 2014, 17:42:19 »

Thx

123

Omega Electrical and Audio Help / Re: Rear view camera

« on: 23 May 2014, 16:48:18 »

Or like I did if you have an Estate.

Rearview camera with CID

124

Omega General Help / Re: Painting Door Mirror Covers

« on: 23 April 2014, 15:58:24 »

Thats exactly what I needed to see Vega so much appreciate the pictures.

 

Is it possible to dismantle down to that stage with mirror still fitted to car or not ?

Yes is possible, you can take the mirror apart while its on the car.

125

Omega General Help / Re: Painting Door Mirror Covers

« on: 23 April 2014, 14:55:51 »

Is this an option, like I did.

126

Omega General Help / Re: pipe behind radio

« on: 09 March 2014, 16:41:01 »

Seen a lot of insides behind the radio but never seen a cooling pipe.
Do you know where its coming from?
Is this a special UK thing?

127

Omega General Help / Re: pipe behind radio

« on: 06 March 2014, 19:35:57 »

Did you make a photo?

128

Omega Electrical and Audio Help / Re: NCDR1500 flash memory and Colour display memory

« on: 29 January 2014, 16:15:59 »

I have all on my desk, im open CID read memory and get PIN same like on CARPASS

Can you tell me where you can find the pin in the memory dump from the 29F160.

129

Omega Electrical and Audio Help / Re: NCDR1500 flash memory and Colour display memory

« on: 26 January 2014, 00:38:45 »

What is the best way to read the flash memory, remove it from the pcb?
I did take a look inside there was a 29F400 present.

130

Omega Electrical and Audio Help / Re: NCDC 2015 and built-in nokia phone

« on: 21 January 2014, 17:46:04 »

Bluetooth kits work fine for voice calls when correctly wired into the aux-in of 2013. Converting the 2015 to a 2013 (programming option, although a couple of buttons are wrong).

Can you explain what the correct wiring is. And what about converting a 2015 to a 2013.

131

Omega General Help / Re: C0131

« on: 08 January 2014, 20:51:40 »

I will source another brake switch.

Check first if it is the brake switch.
Buy a new one.

132

Omega General Help / Re: C0131

« on: 08 January 2014, 13:03:14 »

Thanks. You mean the switch by the pedal? That one is not that clever

Yes that one.

, it would not know anything about any pressure, it is only a "on - off" switch, right? So it must be inside the ABS ECU... which scares me...

Pressure sensor is on the back abs unit.

reading through some threads on other GM forums it seems it is related to the ECU and I'm probably needing a new one. Problem here is that my car has the "latest" ABS ECU with ESP function and I can imagine it is rare as hens teeth and a pain to get a second hand one.

Just check the brake switch, this abs unit is better than the other ones.

Luckily this was fault has so far appeared only once, this morning it was ok.

Yes that was also my problem sometimes an error.

133

Omega General Help / Re: C0131

« on: 07 January 2014, 20:08:56 »

code c0131 was stored. Any ideas?

Code C0131 is the pressure sensor malfunction or incorrect sign.
Check your brake switch, turn on ignition and brake, if the brake lights come on with a delay the brake switch is failing.
When braking the pressure sensor detects increase of pressure but the ecu does not sees that the pedal movement because of the failing brake switch which results in an fault code.

I did have a similar fault code because of a failing brake switch. Replacing the brake switch solves all the problems.

Peter

134

Omega Electrical and Audio Help / Re: Connectors behind interior light

« on: 07 January 2014, 10:17:11 »

It is not the same shape as I have on the "new" mirror. A lot wider and lower, the one in the mirror is merely square

This is the connector for the rainsensor mirror, the mirror for the rainsensor is different than the standard mirror.
There are 3 type of mirror connectors, pre 2000, 2000- standard mirror, 2001- rainsensor mirror.

If have a 2002 Omega with memory seats and memory mirror (without rainsensor) but the plug on the cable is for a mirror with rainsensor (like in the photo) to make it fit there is small piece of adapter loom (original Opel).

Peter

135

Omega Electrical and Audio Help / Re: Connectors behind interior light

« on: 03 January 2014, 18:37:25 »

One is similar to the connector for the light

This is for the rainsensor.

one is square with five wires

This is for the sunroof.

one is looking very "technical" and rectangular in shape.

This one is for the mirror.