Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

226

Omega General Help / Re: Something you might want to check on your Omeg

« on: 06 August 2007, 12:09:51 »

I hate to say this But I think It Special Order The Part  

Hope I am Wrong and You Get It Fixed

227

Omega General Help / Re: Something you might want to check on your Omeg

« on: 04 August 2007, 20:56:19 »

I had a look at mine today lucky my LPG tank did not cover up the plate, I must say i was surprised to see mine were really rusty I am going to get some rust stuff to stop it eatting away at the metal and cover it with Hammer Right

228

Omega General Help / Re: Something you might want to check on your Omeg

« on: 04 August 2007, 13:34:07 »

Boooo I dont think i can check mine as i have a big old LPG tank in the way Grrrr

229

Omega General Help / Re: Steering Wheel Puller

« on: 10 August 2007, 10:22:08 »

Yep I know This Is why I Stopped I did not want to totally knack it as i have to drive 500 miles this weekend so ill sort it when i get back Ill just have to have a steering wheel that is not stright for the mo

230

Omega General Help / Steering Wheel Puller

« on: 09 August 2007, 20:18:00 »

Ahhhhhhhhhhh I cant get my Steering Wheel Back Off

I took it off last weekend to do some checks got it off by putting my knees behind it and hitting the center with a hammer and it popped off no problems. But in putting it back on I was Rushed By The GF to go out and i put it back on not stright Total Bu**er and Now I cant get it back off to put it back on straight and i have hit it over and over with a hammer but no movment at all Grrrrr and i have knacked the nut from hitting it with the hammer that needs replacing.

I think I need a Steering Wheel Puller Does anyone have one ?

Craig

231

Omega General Help / Re: Knocking(pinking).

« on: 06 August 2007, 11:11:10 »

You are running alittle high on the temp mine sits at about 82 on a motorway and slow traffic it sits at about 92.

Dont worry about paper clipping it it will be fine you will not knack the ECU

Craig

232

Omega General Help / Re: heavy steering

« on: 09 August 2007, 12:27:01 »

first port of call would be to check the tire pressure even if the tire looks ok i would still get a PSI meter to check it or go to the garage and use the air pump meter to check.

If they are fine then I think your power steering Pump is on its way out or as you say you could just be alittle picky like i am with everything on your meega  

233

Omega General Help / Re: parcel shelfs...

« on: 09 August 2007, 21:05:03 »

for one with a sun blind its 3 bolts need undoing and then there are 5 i thing plastic clips which need squeezing and pushed through their holes with long nose pliers.

You will need to remove the rear seatbelts at the top and the seat sides parts and acouple of other bits like the rear head rests and the plastic holders for them

234

Omega General Help / Re: parcel shelfs...

« on: 09 August 2007, 20:46:06 »

Yep I just put a Rear Shelf with a sun blind in took no time to replace it

235

Omega General Help / 3 Button Key Fob

« on: 09 August 2007, 16:39:21 »

My Key Fob is starting to look alittle grubby and the rubber is going in place's and the buttons are not working first time all of the time. So been thinking about getting a newer 3 button Key Fob.

My Question is can i just swap my key onto a new fob with out the need of a Tech2 I think I remember about putting the key in the Ign and turning it and leaving for a lenth of time.

Is That All I would Need To Do with Replacing just the Key Fob ?

236

Omega General Help / Re: help! still problems with mis-fire!!!!

« on: 08 August 2007, 09:28:42 »

If I remember Right Taxi Driver Had A misfire and It was his Vap

I had A misfire on my LPG and it was due to the LPG being To Lean

Craig

237

Omega General Help / Re: Omega 2.0 16v Fault codes

« on: 08 August 2007, 15:52:12 »

check all four cables going into your lambda sensor i had to replace mine as all 4 cables were worn down to the metal from rubbing on part of the metal near the clip.

I have been told that sometimes one of the connecting points can be pushed back so not giving a correct connection causing a fault.

So just unplug your lambda and check all the cables and connectors are fine before buying a new one. Mine Set me back about £80 for a NGK 5volt one same as the ones you get from VX but they charge alot more

Craig

238

Omega General Help / Re: brake pad warning

« on: 07 August 2007, 21:11:56 »

front pads

It could be a knacked sensor but i think its just your pads have worn down easy job to do have a look in the how 2 section

239

Omega General Help / Re: 2.0l 16v ave mpg

« on: 07 August 2007, 16:43:07 »

I never run on Petrol so i can only say about LPG

But over a 500 mile exact round trip to the NorthEast with sticking to the Speed Limits it cost around £36 To £38 I worked out it does about 7p to the mile on a long trip and about 10p a mile around town

If I boot it back to the NorthEast It drinks the LPG and its around £44 a return trip Only sounds like acouple of quid but that gets you miles on LPG

240

Omega General Help / Re: HBV?

« on: 07 August 2007, 13:30:56 »

That one of the biggest Failings of the Head Gasket on a 2.0 2.2 4 Pot old Coolent

I change Mine Every Year Now