possible oil in plug recess due to cam cover leaking, the reason I say this is mine done exactly the same due to oil, causing the rubber shrouds over plugs to rot or perish allowing spark to track to cylinder head and cause miss fire for approx 15-20 secs, mine would then be fine allday untill engine left to cool, then would miss fire again.
Hi guys, any body no were the main fuse might be for my sunroof or relay as it has just stopped working today nothing at all , have replaced head gasket this week but can not really see a connection between the two, just strange that it packed up at the same time as head off. :-?
very easy, should be able to do easily in an hour, very basicly remove fan belt, then remove front plastic cam belt cover, you will then see cam sensor between cam pulleys held in place with 1 small bolt remove bolt and pull sensor upwards out between cam pulleys remove cable, replace and refit.
Hi guys update, stripped head of today and thankfully found that head gasket had blown across water jacket into cylinder 3, so at least I now no were water was disapearing to ,going to skim head tuesday then refit later in day, will let you no how it runs when completed.
think I have sussed it, car now starting to steam out of the exhaust when up to running temp, gonna put a glass over exhaust to catch some condensation then take it into my mates work place were he can test to see if antifreeze in exhaust steam, should prove conclusivly then, will let you no monday if head gasket or not.
Hi davey davey, did you not have any coolant stains anywere under the bonnet were it sprayed out, what I mean is I can see hbv valve and can not see any antifreeze stains around it or any connecting pipes, I am still at a loss, still considering head gasket but again have to admit no aapparent symptons, will try what you have suggested.
okay guys replaced the cap this evening, then drove 60 miles home checked level when home and yep it has dropped again used about 1 litre roughly, still no tell tell signs as to were it is going, just can not resolve this problem.