Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - bigtow

Pages: 1 2 3 4 5 [6] 7 8 9 10 11 12 13 ... 27
76
ahh thats not good news al i will have to pm him
 :'(

77
Omega Electrical and Audio Help / Re: pins for facelift ecu
« on: 03 March 2013, 22:12:41 »
my car was converted to manual so the ecu wants a clutch switch feed as its running a auto loom and manual ecu

78
my rear tyres do that mostly on the near side and its been checked and re checked by a WIM franchise

79
Omega Electrical and Audio Help / pins for facelift ecu
« on: 03 March 2013, 21:56:12 »
where can i get some pins to fit into the plug that goes into the ecu as i want to finally get round to retro fitting cruise control to my car ?

80
thanks chris i done that to get them out plus plenty of swearing and the wells were dry

81
right pulled the coil packs today and they are dry as a bone so none the wiser . i did take the breather box and the throttle body off and cleaned them the breather box was full of a nasty brown gunk mostly in the outer large bores i cleaned them through with carb cleaner and a hose pipe but the carb cleaner made the o rings go brittle i managed to find one that fitted the bit that goes into the plenum but it doesnt have the bit that wraps under the bottom of it . run the car and couldn't find any air leaks using a spray to see if the idle changed . so i am still none the wiser please help ? 

82
I don't know as I didn't do the conversion robsymv6 did it . I know it is a silly question but does the plenum have to come off to pull the coil packs ?

83
Had a quick look today can't see or smell any obvious oil leaks around the rocker covers and the foam on the scuttle is bone dry . When I had the rocker cover gaskets go on my old 3.0 it was leaking onto the manifold do they tend to go round the plug wells first on the 3.2 . The fuel filter is looking rather old is there a possibility of fuel starvation causing the miss fire and hesitation ?

84
 :( :( :( :( :( thanks not good then

85
Omega General Help / hesitation underpart and full throttle
« on: 02 March 2013, 03:05:19 »
hi all my car has started to hesitate underpart and full throttle application i have got a video of the peddle test if someone can decode it for me or if anyone has any ideas what may be causing it ?http://s1173.beta.photobucket.com/user/Russ_Hill/media/2CCD5585-D409-4EB1-A56A-4C0762FD4FC6-7029-000005EDDE27769E_zps1909f2ab.mp4.html

86
Given up for the time being as robseymv6 has come to the rescue once again but thanks for the help

87
finally got through to them they dont stock anything to fit my car ????????????

88
still no reply from them  >:( >:( >:( >:( >:( >:( >:( >:( >:(

89
 >:( >:( >:( >:( >:( grrrrrr had a email this morning asking me for the details of my car that i had already given them and no joy on the phone do these people want any business ??????????? 

90
Quote
Bigtow, I have a nearly new PFL V6 saloon system from the cats back that is no use to me. It's in my lockup in Hoo. Yours for £20. The exhaust that is, not the lockup!
Nick


thank you for the offer but the saloon pipes wont fit my estate  :'(

Pages: 1 2 3 4 5 [6] 7 8 9 10 11 12 13 ... 27

Page created in 0.011 seconds with 14 queries.