Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

91

Omega General Help / Re: Wheel wobble......

« on: 21 August 2007, 14:03:25 »

If bearings etc check out ok, then there is another possible cause and that's the nut under top nut of strut maybe working loose,; you'll need to pop off the plastic cover on the strut top mount, then remove the top nut (I think allen key and large spanner will be needed here) followed by the large domed washer and you should then see the lower nut (this holds spring/bearing and strut assy. together) now check tightness of this nut, if this nut is loose it can cause wheel wobble at around the speeds you mention.
Cheers Pete

92

Omega General Help / Re: Air flow meter.

« on: 30 August 2007, 19:44:41 »

And also check the electrical connector pins on it for corrosion.

93

Omega General Help / Re: Wheel wont come off!!!

« on: 29 August 2007, 13:51:11 »

Do as Marks DTM says , always worked for me also
Cheers pete

94

Omega General Help / Re: Rougth Idle

« on: 22 August 2007, 20:33:05 »

Also try changing both the Fuel and Air filters.
Cheers Pete

95

Omega General Help / Re: Pink Liquid Leak

« on: 30 August 2007, 13:49:54 »

HBV is just under the scuttle on drivers side.
Cheers Pete

96

Omega General Help / Re: Re:- Wheel Balancing !!!!!!!!!

« on: 29 August 2007, 19:15:42 »

 

97

Omega General Help / Re: Wheel Balancing !!!!!

« on: 28 August 2007, 20:18:06 »

If bearings etc check out ok, then there is another possible cause and that's the nut under top nut of strut maybe working loose,; you'll need to pop off the plastic cover on the strut top mount, then remove the top nut (I think allen key and large spanner will be needed here) followed by the large domed washer and you should then see the lower nut (this holds spring/bearing and strut assy. together) now check tightness of this nut, if this nut is loose it can cause wheel wobble at around the speeds you mention.
Cheers Pete

98

Omega General Help / Re: Diagnostics.

« on: 28 August 2007, 09:01:38 »

Elm 327 won't work with yours as it's '98 model they only work with 2001+ models
cheers Pete

99

Omega General Help / Re: protocol

« on: 23 August 2007, 16:17:27 »

Ok thanks guys
Cheers Pete

100

Omega General Help / Re: protocol

« on: 23 August 2007, 14:54:06 »

Yes, have all that mate, but just need to know what OBDII protocol the car uses I think it's ISO... but not sure.
Cheers Pete

101

Omega General Help / protocol

« on: 23 August 2007, 14:34:51 »

Does anyone know which vehicle protocol the 2.2 Omega uses for diagnostics etc,
Cheers Pete

102

Omega General Help / Re: Vibration after long descent

« on: 21 August 2007, 14:09:09 »

Could be discs warping under extreme heat, have a look at them and see if there's a large lip on the outer of the discs if so then replace them along with new pads.
Cheers Pete

103

Omega General Help / Re: Random washer Jet Performance!

« on: 21 August 2007, 19:30:36 »

I was just about to reply with, Put some water in; what a state to get into eh.
Cheers Pete

104

Omega General Help / Re: ProSan Diagnostic software

« on: 20 August 2007, 14:34:34 »

The boy, I've got the scantool software and works a treat , but looking around for something a little more comprehnsive.
Cheers Pete

105

Omega General Help / Re: ProSan Diagnostic software

« on: 20 August 2007, 13:38:21 »

Cheers Mate, I'll have a look at that; not sure if mine is Can-bus or not.
Cheers Pete