Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Krax

Pages: [1] 2
1
Omega Electrical and Audio Help / Re: ECU for xenon light
« on: 04 September 2010, 19:07:49 »
Hi !
I now understand what you mean. ::) Thanks for all the trouble. Wonderful with friends who help. ;D ;) :) :y

2
Omega Electrical and Audio Help / Re: ECU for xenon light
« on: 03 September 2010, 19:48:12 »
 
I do not understand what you mean. I'm from Sweden and can not really the technical terms. Can you explain in a different way? "take the wheel arch liner off" . Can  I see the ECU behind the front wheel?

3
Omega Electrical and Audio Help / ECU for xenon light
« on: 03 September 2010, 18:53:18 »
Hi
Can someone help me find the ECU for xenon light to an Omega 2.2.
Here is a link looks like the ECU. http://www.bildelsbasen.se/?index=default&link=item&post_id=18349484
Hakan

4
Omega General Help / Re: Gearbox
« on: 12 August 2010, 18:16:46 »
Quote
Checked manual box oil level?
See PM

5
Omega General Help / Re: 2.2 with P0170 code
« on: 31 March 2009, 19:33:06 »
On my car was the error, P0170, ECU and MAF. I had changed before the MAF and lambda, but the error was ECU. If the ECU is broken, it will result felt broken MAF.

6
Omega General Help / Re: can I put these tyres??
« on: 16 September 2009, 18:05:40 »
225x0,55=123,75  :D
205x0,60=123,00  :D
205x0,55=118,25 :-[

7
Omega General Help / Re: can I put these tyres??
« on: 16 September 2009, 17:55:19 »
205x60x16 :D

8
Omega General Help / Re: Donors Omega 2.2?
« on: 18 February 2009, 20:17:01 »
Hi Sorry for bad English. It is the donor for the water temperature to Omega 2.2 petrol / Krax

9
Omega General Help / Donors Omega 2.2?
« on: 18 February 2009, 19:54:25 »

10
Omega General Help / Re: Misfiring Y22XE
« on: 11 December 2008, 18:51:04 »
In Swedis: P 0302, cylinder 2 = misständning upptäckt! Samma gäller P0304 fast här är det är cylinder 4 som indikerar fel.
Orsaken kan vara;  Mekansikt motorfel, ledningar, tändsystem/bränslesystem, insprutare, motortemperaturgivare/luftmassamätare, motorstyrdon. :y
Krax

11
Omega General Help / Re: Cam Sensor 2.2 Facelift
« on: 22 December 2007, 19:03:33 »
Yes, lots of photos please :)

12
Omega General Help / Re: Crankshaft Omega 2.2 problem
« on: 20 November 2007, 18:54:10 »
Hello everybody! :)

I have changed the cam sensor today.
And the cam sensor was the problem!
My Omega goes like a dream again. ;)

Thanks for all help and quick answers.

Krax from Sweden, a happy Omega owner again!

13
Omega General Help / Re: Crankshaft Omega 2.2 problem
« on: 19 November 2007, 17:47:18 »
Hi

Opel workshop say if i dot remember wrong, trouble code 335.

On the camshaft there is 4.8 Volt, hot as cold

14
Omega General Help / Crankshaft Omega 2.2 problem
« on: 19 November 2007, 17:32:08 »
Hi,

I have an Omega 2.2 -2001, and I have problem with my engine. When I start the engine cold the engine works very good.
I can drive many mils without problem. If I turn off the engine when it´s warm and tray to turn it on again,
the engine starts up wrong. On the instrument panel the "Check Engine Light" is on. The car runs on the emergency program, max 4500 rpm.

I have read the faultcodes and it´s saying that the crankshaft is defect. I have change the crankskaft, GM original.
But I have still the same problem:
Cold – no problem.
Hot – problem.
The faultcodes was readed when the engine was warm. Faultcode was 335 if I remember correct.

I have measure the voltage. Ignition on, against wiring harness connector crankshaft.
Cold motor = 2.46 Volt.
Warm motor = 0.02 Volt.
Why only 0,02 Volt with warm motor?  

Please help me with my problem, all proposals are welcome.

Krax from Sweden :y

15
Omega General Help / Re: crankshaft sensor
« on: 18 October 2007, 19:51:45 »
 :y

Pages: [1] 2

Page created in 0.008 seconds with 13 queries.