Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: EML Light After Cats And Sensors Replaced

« on: 29 August 2012, 19:18:18 »

Both Cats Replaced With New Units as the originals were rotten through the outer shields and Cat housing. I have just spoken to one of the guys at the garage close to and he has offered a Tech 2 plug in this next week as my own code reader LED has given up.
Thanks For Your Help.   

2

Omega General Help / EML Light After Cats And Sensors Replaced

« on: 29 August 2012, 17:56:19 »

Hi  Has anybody any ideas I have replaced the Cats and all four sensors on my 01 Plate 2.6 DBW engine the light was out for about 100 miles but is now back on. Could it be the NGK Lambda sensors fitted or could it be the ECU/MAF now requiring attention.   

3

Omega General Help / Re: Air Con No Heat Passenger Side Only

« on: 05 December 2007, 20:32:34 »

Hi Guys You Are Sooooooooooooooooooooooo Good
 A Great Big Thank You To All Who Have Given Advice On This Problem As I Have Taken Time Out Today To Fix What Was A Detached Servo Arm Causing The Problem.
Having Removed The Servo Unit I Found That The "Lugs" On The Cam Were Worn So I Drilled A 2mm Hole Through The Centre And Secured A Small Cheese Head Screw The Head Of The Screw Being The Same Diameter As The Lugs To Ensure That At Re-Fit Everything Snapped Back Into Place With The Right Tolerance And Greater Security On Movement.

Thanks Again For Everything
Stokey

PS: "To The Boy"  I Did Take Some Photos But Have Not Yet Fathomed Out How To Attach To The Site

4

Omega General Help / Re: Air Con No Heat Passenger Side Only

« on: 01 December 2007, 21:20:39 »

Thanks For The Info But Could Please Advise Me As To The Servo/Arm Location And Best Access Route
To Correct The No Heat Problem On the Passenger Side.

Thanks Again: Stokey

5

Omega General Help / Air Con No Heat Passenger Side Only

« on: 01 December 2007, 18:50:27 »

Hi Guys Can Any One Help With The Problem Of No Heat From The Air Con Unit On The Passenger Side "Only" Of My 01 Plate 2.6 CDX, As It Is The Wrong Time Of Year For The Wife To Have Chapped Legs And Freezing Ankles.

Also Any Idea As To What The Problem Might Be When The Dash Display Reads "Low Beam FLD/Vision"

I Have Only Had The Car A Couple Of Days So Any Advice Would Be Greatly Appreciated

Thanks: Stokey

6

Newbie Welcome Area / Hi Great Forum

« on: 01 December 2007, 00:46:35 »

Just to say Hello as a Newbie.
 I Have Just Replaced My Tired 94 Plate 2.5 CDX For An 01 Plate 2.6 CDX
and I can see you guys on this site are more than able to exchange views
and resolve problems by good communication based on first hand experience.
Cheers
    Stokey