Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: Gear box terminal????

« on: 24 March 2008, 13:18:38 »

Quite simple really to explain...

Stick it in drive D, car pulls away no problem, changes up to 2nd, as it reaches 30mph, about to change up to 3rd, it's like it slips out of gear and you free wheel for a bit, if I rev up sometimes it goes in to 3rd, but not always, it goes in to 4th....but mainly what happens, is I let it freewheel for a couple of seconds, then it will kick into 3rd...

I did notice, if I just manualy drop the stick back to 3rd and drive not in D but 3 it goes fine...It's almost like D is not working properly......

Any ideas? It's driving me nuts, and as a taxi driver, I am trying to not let my passengers notice.....

2

Omega General Help / Re: Gear box terminal????

« on: 24 March 2008, 12:05:46 »

Yes, done all that and as I said the cutting out seems to have stopped...the instructions where great!!!!

I am just concerned now about the gearbox, I am worried that I may do damage if I keep driving it, but I need it to earn, as I am a taxi driver......

By the way a good friend of mine was offered one this week, for 3k, 00 model 2.0L Auto same spec as mine, withou the problems...Is 3K about the going rate?

3

Omega General Help / Re: Gear box terminal????

« on: 24 March 2008, 11:13:06 »

Hi guys, I am a noob, so pls forgive me...

I bought an Omega 2.0 1999 Automatic, 6 weeks ago(wife told me not to), that started to give me trouble almost right away,(I didn't tell her), it started to cut out when stopped at traffic lights, etc, so I changed the fuel filter, thinking this might be just dirt causing the prob..it was still doing it, but not so often, but then I found it was not going into gear right, pull away 1, 2, then miss gear like it was in neutral, followed by a kick as it engaged 3rd....Followed by stuck in top gear.....Then on the dashboard display, comes up "Automatic transmission....Check"

Anyway I brought it to a mechanic to have it checked out, and he found that the EML (engine man light)  was not working, so there was no memory of problems stored, and in his opinion, someone had disconnected it to hide any problems from the buyer,(Bloody me!!) ..
What I need to know is..

How would he have done it?
I had the tranny fluid checked, all ok!  is it I am in big trouble?

ps, had to tell the wife the car wont go and I may have been conned, my face still hurts from the slap

----------------------------------------------------------------------------------
Here is an update.....

Got the EM light working and was able to get areading off it now..

Mech said "Exhaust airflow sensor was not working and that is the problem with cutting out," and he wants about 300 quid to replace it, as it is 196 plus vat just for the sensor!!!!!!!!

And having said all that, I followed all the great info you guys have givin' ref cleaning all the breathers and the cutting out seems to have stopped....Thanks guys!!!!

As for the gearbox, he said "Nothing is showing up on the computer for faults, and it maybe a hydraulic problem, but deff' not electrical.

1 more thing new, and I dont know if it makes a differance, but, if I am driving and it refuses to go in to gear, ie 3rd, I drop the gears from D to 3 on the gear box I get gear no problem, and can drive around the city ok for quite awhile with little problems

4

Omega General Help / Re: Gear box terminal????

« on: 14 March 2008, 12:43:28 »

Here is an update.....

Got the EM light working and was able to get areading off it now..

Mech said "Exhaust airflow sensor was not working and that is the problem with cutting out," and he wants about 300 quid to replace it, as it is 196 plus vat just for the sensor!!!!!!!!

As for the gearbox, he said "Nothing is showing up on the computer for faults, and it maybe a hydraulic problem, but deff' not electrical.

I am stummped!!!!!!!!

5

Omega General Help / Re: Gear box terminal????

« on: 06 March 2008, 15:07:10 »

Can I spray carb cleaner on the rubber hose's? Having looked at the hose's from the air filter right back to the throttle body, the amount of crap in them, to me anyway, is just to much to be normal, or it has never been cleaned.....plenty of crap on the throttle butterfly too....

As for the auto fluid, according to the mechanic, there is plenty and it is fine...He said he cant check the diagnostic on the gear box as it is seperate unit and he does not have the equipment for that, only the engine...He also said that there is no codes been stored on the engine...


Aghhhhhhhh!!!

6

Omega General Help / Re: Gear box terminal????

« on: 06 March 2008, 12:31:56 »

ok I have taken the breather apart, and am going to clean the hose's but no mention of what to use...can I use carb cleaner on everything, someone told me u cant...also do I clean the air flow meter too

By the way, can I spray the butterfly flap too...on looking at the butterfly, and pulling the trottle to open it, looking down, I could see a small pool of what looks like oil...

I have never done this before, so I am worried s***less

7

Omega General Help / Gear box terminal????

« on: 06 March 2008, 09:39:22 »

Hi guys, I am a noob, so pls forgive me...

I bought an Omega 2.0 1999 Automatic, 6 weeks ago(wife told me not to), that started to give me trouble almost right away,(I didn't tell her), it started to cut out when stopped at traffic lights, etc, so I changed the fuel filter, thinking this might be just dirt causing the prob..it was still doing it, but not so often, but then I found it was not going into gear right, pull away 1, 2, then miss gear like it was in neutral, followed by a kick as it engaged 3rd....Followed by stuck in top gear.....Then on the dashboard display, comes up "Automatic transmission....Check"

Anyway I brought it to a mechanic to have it checked out, and he found that the EML (engine man light)  was not working, so there was no memory of problems stored, and in his opinion, someone had disconnected it to hide any problems from the buyer,(Bloody me!!) ..
What I need to know is..

How would he have done it?
I had the tranny fluid checked, all ok!  is it I am in big trouble?

ps, had to tell the wife the car wont go and I may have been conned, my face still hurts from the slap