1
Omega General Help / Re: engine breathers
« on: 23 March 2008, 12:12:47 »
ok,thanks for clearing that up,i was gonna do it today but i got heavy snow....grrr,1 more day before work or it'll have to wait til next week 
- 08 November 2025, 16:57:17
- Welcome, Guest
News:
Please play nicely. No one wants to listen/read a keyboard warriors rants....
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Omega General Help / Re: engine breathers
« on: 23 March 2008, 01:09:33 »
now you confused me,i search breathers and found a link where there are 2 pipes,1 small and 1 larger,no info but just a pic,these look very easy just on side of engine,then i got sent a link where they say clean crankcase sensor breathers under that big silver bit on top middle of engine,its mayo related stuff and i assumed that it wasnt crankcase sensor breather,just the general engine breather or are these things the same thing,sorry for my ignorance 
3
Omega General Help / engine breathers
« on: 23 March 2008, 00:39:26 »
hi,i recently made a post about mayo and was told to make a jacket for oil filler tube neck which i have done and seems fine but when i went to clean breathers i couldnt find em 
,i have the v6,please some1 tell me where they are and fingers crossed that they are accessable without dismantling 3/4 tonne other parts
,i have the v6,please some1 tell me where they are and fingers crossed that they are accessable without dismantling 3/4 tonne other parts
4
Omega General Help / Re: sticky drivers door lock
« on: 22 March 2008, 11:10:24 »
cheers ill get new part next week,sounds like the prob 
5
Omega General Help / sticky drivers door lock
« on: 22 March 2008, 09:42:57 »
hi,im not saying im a sticky driver,lol,but my door lock gets stuck in the open position when i use fob to lock the doors,some days its fine and other days it just wont work(all 3 other doors work fine),i have looked through the service records and receipts to see that it has been changed in the past too.is this common and can i repair it myself,ie just a lube problem or something easy...cheers
6
Omega General Help / Re: condonsation build up in oil filler
« on: 20 March 2008, 22:55:19 » ok,that sounds like the trick,many thanks ..nice one
7
Omega General Help / Re: condonsation build up in oil filler
« on: 20 March 2008, 06:34:45 »
thanks for info, i thought shell helix was good as it cost £59 with a £7.50 top up from vx main dealer(marshalls),i didnt pay tho 
,can you recommend a good oil,i drive my cars hard but with respect,and lastly i did think of putting something round the neck of the oil filler tube but then i thought about the fire risk,can felt be safly used or should i try to get hold of a piece of fireblanket etc...ps,you have put my mind at rest as i keep thinking headgasket...cheers
,can you recommend a good oil,i drive my cars hard but with respect,and lastly i did think of putting something round the neck of the oil filler tube but then i thought about the fire risk,can felt be safly used or should i try to get hold of a piece of fireblanket etc...ps,you have put my mind at rest as i keep thinking headgasket...cheers
8
Omega General Help / Re: condonsation build up in oil filler
« on: 19 March 2008, 16:38:59 »
hey thanks for all the info,i use shell helix,its what vauxhalls main dealer puts in it,its had plenty of regular servicing(last one only 4000 miles ago).think ill check out the breathers just to make sure,cheers again
9
Omega General Help / Re: condonsation build up in oil filler
« on: 19 March 2008, 07:38:55 »
shall i continue to clean it or just leave it,thanks
10
Omega General Help / condonsation build up in oil filler
« on: 19 March 2008, 07:29:06 »
hi,i have a 2.5 petrol,i use it for big fishing trips all over the country and france,it runs with no probs,but unfortunatly i work about 3 miles from where i live,hence it does a lot of short journeys and i get the impression that these cars dont like it too much as i get white sludge build up just inside oil filler(about half an eggcup full a fortnight).i dont believe its head gasget as i clean sludge away from cap,do a 300 mile journey,and its still nice and clean with no oil/water loss...is there something i could do to minimise this except do a lot of miles regulary
11
Omega General Help / Re: What should I idle at??
« on: 19 March 2008, 07:15:13 »Quote
Hey dudes, just wondered if anyone knew what I should be idling at, its a 2002 2.2i auto and it idles at 900rpm, is this normal?well i reckon you should idle at work for best results
12
Newbie Welcome Area / Re: Hi from a new member!
« on: 20 March 2008, 23:01:54 »
hi and welcome 
,these chaps know there stuff,yes a great find
,these chaps know there stuff,yes a great find
14
Newbie Welcome Area / hey all
« on: 19 March 2008, 06:41:23 »
[smiley=vrolijk_26.gif] hi fellow miggy owners,hope to visit regulary,but not too much
15
General Discussion Area / who are we
« on: 19 March 2008, 06:48:25 »
i have an omega estate and have a couple of friends who also have miggy estates,we are all carp fishermen,is this a general trend for carpers to have good old miggy's
Pages: [1]