1
Omega Electrical and Audio Help / Re: radio aerial in drivers footwell
« on: 20 August 2008, 20:56:55 »
best get to vauxhall then to get them to lever the unit out...
- 17 November 2025, 20:29:48
- Welcome, Guest
News:
Search the maintenance guides for answers to 99.999% of Omega questions
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega Electrical and Audio Help / Re: radio aerial in drivers footwell
« on: 20 August 2008, 20:16:17 »
trying to install harmon kardon to get better signal
3
Omega Electrical and Audio Help / Re: radio aerial in drivers footwell
« on: 20 August 2008, 11:18:33 »
normal radio one
4
Omega Electrical and Audio Help / radio aerial in drivers footwell
« on: 19 August 2008, 16:34:32 »
which wire is it and where exactly is it?
ive had a good look, but am unsure, tried to pull the radio out again, even had an audio shop try with their more substanstial keys and they gave up and said try vx, which i'd rather not.
:-/
ive had a good look, but am unsure, tried to pull the radio out again, even had an audio shop try with their more substanstial keys and they gave up and said try vx, which i'd rather not.
:-/
5
Omega Electrical and Audio Help / fitting Harman karman driveplay
« on: 12 August 2008, 16:23:42 »
whats the best way to route the aerial?
currenty got box under drivers seat,
currenty got box under drivers seat,
6
Omega Electrical and Audio Help / Re: getting CCR2006 out
« on: 12 August 2008, 22:56:48 »
driver or passenger side?
7
Omega Electrical and Audio Help / getting CCR2006 out
« on: 12 August 2008, 16:22:37 »
i have the keys, i have inserted them, yet tugging doesnt do owt...
is there a knack?
is there a knack?
8
Omega Electrical and Audio Help / Re: ccr2006
« on: 12 July 2008, 22:22:56 »
looks like a new HU would be the best option...
looking at the the Clarion DUZ388RMP, obviously id need a facia adaptor to make it fit - anyone have any pictures of this particular model installed?
would the radio data bit of the data computer and stering wheel controls still work?
looking at the the Clarion DUZ388RMP, obviously id need a facia adaptor to make it fit - anyone have any pictures of this particular model installed?
would the radio data bit of the data computer and stering wheel controls still work?
9
Omega Electrical and Audio Help / ccr2006
« on: 12 July 2008, 15:30:39 »
i know these dont like CDRs so i was wondering what is the best way to have another input such as a memory card reader or usb or mp3 player type thing, that gets controlled through the headunit?
10
Omega General Help / Re: 2.6 not running
« on: 20 September 2010, 18:35:05 »
New belt etc fittted, turnrned over by hand.
Cams get halfway round, then wont move any further.
So I have bent valves.
Best course of action?
Cost of fixing, and difficulty?
Cams get halfway round, then wont move any further.
So I have bent valves.
Best course of action?
Cost of fixing, and difficulty?
11
Omega General Help / Re: 2.6 not running
« on: 20 September 2010, 13:57:00 »
OK, whats broken is the cambelt tensioner - the one at the top between the two banks. the ball bearings have failed and gone everywhere.
anyway, the drivers bank (1&2) timing is ok, but the passenger bank (3&4)- the cam 4 timing was about an inch different to cam 3. i have reset it all to the correct timing, but how do i know whether there is any internal valve damage?
anyway, the drivers bank (1&2) timing is ok, but the passenger bank (3&4)- the cam 4 timing was about an inch different to cam 3. i have reset it all to the correct timing, but how do i know whether there is any internal valve damage?
12
Omega General Help / Re: 2.6 not running
« on: 15 September 2010, 00:27:21 »
I'll update on sat/sun as that is when i'll be back home with my tools and things 
13
Omega General Help / Re: 2.6 not running
« on: 15 September 2010, 00:12:33 »
Oh yes, i had 3 error codes that i jotted down about 3 days previous:
0100
0560
0325
there may be more now...
0100
0560
0325
there may be more now...
14
Omega General Help / Re: 2.6 not running
« on: 15 September 2010, 00:11:10 »
Cant tell you the error codes till later in the week, but there are two or three from memory.
tensioners etc were all changed with belt. vauxhall kit.
2003 2.6 auto saloon, 95500 miles cambelt at 79k.
did accidentally put about 3 litres of two stoke/petrol mix in 300 miles previous - makes no differnce according to RAC fella.
tensioners etc were all changed with belt. vauxhall kit.
2003 2.6 auto saloon, 95500 miles cambelt at 79k.
did accidentally put about 3 litres of two stoke/petrol mix in 300 miles previous - makes no differnce according to RAC fella.
15
Omega General Help / 2.6 not running
« on: 14 September 2010, 22:55:36 »
On holiday in Devon, about 5 minutes from the accomodation and i the EML comes on, and i lose power, no odd noises just low power, i.e floor it at 40 and not a lot happens, just slowly speed up. Think to myself i'll pull over in the next layby and then the engine cuts. no bang or anything just cuts out. coast onto a grass verge and turn the key, grating noise. 
RAC come out and diagnose a top end problem, with the cams most likely, tow me to a garage who estimate £2k without even looking at the engine for new belt and gubbins, new gaskets, skimmed heads and new cams all round, i tell them dont bother i'll have the RAC flatbed it home next week at the end of my holiday, in the meantime i've bought a cheap as chips '96 1.2 corsa that's as slow as a one legged dog on tranquilizers. but anyway, when i get home i'm gonna investigate properly and fix it myself if possible.
So any ideas what it could be?
Timing belt was tight and only 17k old btw.
RAC come out and diagnose a top end problem, with the cams most likely, tow me to a garage who estimate £2k without even looking at the engine for new belt and gubbins, new gaskets, skimmed heads and new cams all round, i tell them dont bother i'll have the RAC flatbed it home next week at the end of my holiday, in the meantime i've bought a cheap as chips '96 1.2 corsa that's as slow as a one legged dog on tranquilizers. but anyway, when i get home i'm gonna investigate properly and fix it myself if possible.So any ideas what it could be?
Timing belt was tight and only 17k old btw.