1
Omega General Help / Re: First gas - some issues
« on: 28 August 2013, 01:42:14 »
First time on site this year due to illness but looking at your problem you do need cable from laptop to gas ECU diagnostic plug also software from tinleytech co.uk , there is a free catalogue explaining how to fit also set up installationof software and there is the Bigas site . Ihave fitted Bigas Sequential Injection on 3 cars4 cylinder but 6 cylinder are no different.
On the software there is self calibration which must be done to set up gas ECU :- ( briefly your foot is held on the accelerator at a certain revs and kept there till the software says done , this process is started on petrol and when done switches to gas and stays on gas ) any mistakes on keeping the revs steady you just have to re-calibrate again. Save configuration when happy this is on the software, but remember you have to set finer settings explained in catalogue . All this is done with engine warm hope this helps if this is a Bigas system cable and software can be bought as a package around £30
On the software there is self calibration which must be done to set up gas ECU :- ( briefly your foot is held on the accelerator at a certain revs and kept there till the software says done , this process is started on petrol and when done switches to gas and stays on gas ) any mistakes on keeping the revs steady you just have to re-calibrate again. Save configuration when happy this is on the software, but remember you have to set finer settings explained in catalogue . All this is done with engine warm hope this helps if this is a Bigas system cable and software can be bought as a package around £30
hope this helps 
at the moment, just needs a good run thanks for the help. 
