1
Omega Electrical and Audio Help / Re: Fuse keeps blowing but need help!
« on: 07 February 2010, 15:20:56 »
Its the intercooler fan fuse, mine kept blowing aswell. so checked fan today and it's siezed solid.
- 05 May 2025, 05:11:50
- Welcome, Guest
News:
Please play nicely. No one wants to listen/read a keyboard warriors rants....
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Omega General Help / Re: tuning box
« on: 25 July 2010, 22:42:09 »
would suggest a chat to the supplier then
3
Omega General Help / Re: tuning box
« on: 25 July 2010, 21:03:10 »
Is your box a plug in type or wire-in type ?
4
Omega General Help / Re: tuning box
« on: 25 July 2010, 18:21:46 »
Have box fitted to mine. Had no problems what so ever with it. Pulls very well indeed. No clouds of black smoke or boost problems. I would double check you have it connected correctly. as far as i know the amount of boost is controlled by the wastegate, so if yours is overboosting maybe your wastegate is not opening correctly/sticking but you only notice it with the box on. Worth a look if nothing else 
5
Omega General Help / Re: MPG for old tired 2.5TD
« on: 17 July 2010, 19:54:18 »
143,000 (chipped) on mine at the min. low 30's around town, 45+ on a run.
6
Omega General Help / Re: TD intake manifold cleaning
« on: 12 July 2010, 09:14:04 »
Did mine during the week. Was surprised how clean it was,just a light misting of oil. Had a bmw 325 tds (same engine) that had a layer of hard crud about 5mm think all around the inlet runners. I've had the egr blanked for a while which helps alot. I also found the manifold gaskets were missing due to a previous numpty owner. Does make a difference after a good clean out.
7
Omega General Help / Re: TD Inlet manifold
« on: 09 July 2010, 17:05:14 »
Thats good news, after finding the gaskets missing had visions of previous owner doing a vanishing act on the sensor. All done now anyway, no more oil mist blowing out of number 1.
8
Omega General Help / TD Inlet manifold
« on: 08 July 2010, 23:14:29 »
Decided to tackle the blowing inlet manifold tonight. On closer inspection it looked like a previous owner had been there before. One manifold bracket missing,the other only had one bolt in it. Once the manifold was off, all 6 gaskets were missing. Manifold was pretty clean inside just a slight misting of oil. One thing I noticed was a bolt where the Air temp sensor should be in the bottom of the manifold, should a 96 td have one ? . I can't find any spare plugs/cables for one.
9
Omega General Help / Re: Brick hard brake pedal
« on: 07 June 2010, 12:36:18 »
As of this morning, brakes working fine. Will check pipe anyway. Maybe vac pump having funny 5 mins 
10
Omega General Help / Brick hard brake pedal
« on: 06 June 2010, 15:08:56 »
Brake pedal suddenly gone brick hard . Guessing servo or vacuum pump. Anybody know what reading i should get on a vac gauge connected to the vac pump?
11
Omega General Help / Re: donut bushes
« on: 28 April 2010, 11:04:32 »
be about right, only 5 left when i ordered mine
12
Omega General Help / Re: donut bushes
« on: 28 April 2010, 09:34:47 »
Just bought a pair, so hope there ok 
13
Omega General Help / Re: 2.5td fuel economy
« on: 13 April 2010, 14:04:14 »
its manual, so no worries
14
Omega General Help / Re: 2.5td fuel economy
« on: 13 April 2010, 13:03:51 »
Box came from a company in germany MAL electonics, Just connects to 4 cables in the main ecu plug. Fully adjustable from normal power to 30% power increase.
http://www.mal-electronics.com/html/englisch.html
It's listed as td powerbox, only took 2 days to arrive from germany aswell.
http://www.mal-electronics.com/html/englisch.html
It's listed as td powerbox, only took 2 days to arrive from germany aswell.
15
Omega General Help / Re: 2.5td fuel economy
« on: 13 April 2010, 12:02:01 »
currently avg low 30's local, low 40's on a run with a powerbox fitted. Plenty of grunt and no smoke.