Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Omega General Help / Re: blend valve

« on: 13 February 2010, 18:37:54 »

Hi,all,sorted the problem today and everybodies help was spot on,there are two blend valves one on either side of the air box quite low down and the plastic arm had come off the drivers side,took me 30 minutes to fix.Thanks Forum.

2

Omega General Help / Re: blend valve

« on: 12 February 2010, 20:15:23 »

Hi,Andy,so there is a separate valve to operate either side,so are they attatched to the air box on motors with arms on or are we talking the vac units,ive seen one behind the glove box in the top left corner,take it there is one in a similar position on the drivers side as i get hot air on passenger side and cold on drivers,have also seen two long vac pipes running down the drivers side to where the heater matrix pipes are.

3

Omega General Help / Re: blend valve

« on: 12 February 2010, 19:40:48 »

Thanks all,looks like i,m in for a stiff neck.

4

Omega General Help / blend valve

« on: 12 February 2010, 19:03:48 »

Hi,anybody know where the interior heater blend valve is on my omega c,been told its on the drivers side,thanks.

5

Omega General Help / Re: interior heaters

« on: 12 February 2010, 17:10:27 »

Blend valve actuator arm on the drivers side has popped off, see the maintenance guide section for how to fix

Hi,just had a look in the guides and can,t see anything,is the blend valve on the side of the iar box or in the footwell.Thanks.

6

Omega General Help / interior heaters

« on: 12 February 2010, 16:39:47 »

Hi,i have an omega c 2.2 estate with a interior heater fault,with both sides on HI it only blows hot air at the passenger side and cold air on the drivers side,can anyone shed any light on this,it doesn,t matter what the heat setting is as it still blows cold at the drivers side,any help would be greatly welcomed.Thanks.