Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[I_want_an_Omega]

I need to install a Parrot Bluetooth kit into my '99 MFL Elite.

Have etablished that the X31 connector isn't present as it's a CCRT700 car, so I guess I'll have to go down the trafficmaster loom route.

I'm ok with tapping into power, which just leaves mute and the audio in signal to sort.

Mute seems to be on A1, with the audio-in being on C18 & C19.

In looking at the TM loom I can see power (red & brown), and the audio-in pins (orange & red/white), but how does the TM switch the radio to the external input if the mute line isn't connected?

Can someone help clarify please before I start wiring ............

Thanks - Rob

[TheBoy]

yup, feed audio in on the Aux In, and the std mute.  Thought they were on 34/35/36 though. Might be NCDC only though....

[I_want_an_Omega]

yup, feed audio in on the Aux In, and the std mute.  Thought they were on 34/35/36 though. Might be NCDC only though....

I'll double check my source.

Any idea how the TM does the switching if the mute isn't wired in?

Cheers 

[TheBoy]

yup, feed audio in on the Aux In, and the std mute.  Thought they were on 34/35/36 though. Might be NCDC only though....

I'll double check my source.

Any idea how the TM does the switching if the mute isn't wired in?

Cheers 

Trafficmaster needs the mute.  Factory fit ccrt700 + Trafficmaster have incomplete trafficmaster looms, so you need to add 3 wires

[I_want_an_Omega]

yup, feed audio in on the Aux In, and the std mute.  Thought they were on 34/35/36 though. Might be NCDC only though....

I'll double check my source.

Any idea how the TM does the switching if the mute isn't wired in?

Cheers 

Trafficmaster needs the mute.  Factory fit ccrt700 + Trafficmaster have incomplete trafficmaster looms, so you need to add 3 wires

Ok, understood - thanks