Topic: Particle filter (Read 1156 times)

ARGYLE47 · « **on:** 27 April 2012, 17:47:31 »

Hi all, driving my 2.2 diesel 03 reg this morning the exhaust warning light came on and i suffered a drop in power, after about 2 mins it cleared itself, then about 20 mins later it came on again, this time it cut out. I got it restarted and managed to get to work. I rang the aa and they came out , the machanic said it was the particle filter, and said if it comes on rev the engine to about 3000 rpm and it should clear itself, is this an easy repair and how much , have also noticed fuel comsumption is down , thanks for any help

martin42 · « **Reply #1 on:** 27 April 2012, 19:47:32 »

Check fault codes 1st

ARGYLE47 · « **Reply #2 on:** 27 April 2012, 19:48:55 »

Yes, the rev counter did stop

martin42 · « **Reply #3 on:** 27 April 2012, 20:56:17 »

Crankshaft sensor

TheBoy · « **Reply #4 on:** 27 April 2012, 22:22:54 »

You need to get the fault codes read first, anything else is guesswork

feeutfo · « **Reply #5 on:** 28 April 2012, 02:12:19 »

Is the AA man suggesting it has DPF?

aaronjb · « **Reply #6 on:** 28 April 2012, 16:46:03 »

Quote from: chrisgixer on 28 April 2012, 02:12:19

Is the AA man suggesting it has DPF?

That was how I read it too

feeutfo · « **Reply #7 on:** 28 April 2012, 17:44:07 »

Well, I never knew that. Designers ahead of their time on the omega. Who'dafunkit.

News:

Author Topic: Particle filter (Read 1156 times)

ARGYLE47

Particle filter

martin42

Re: Particle filter

ARGYLE47

Re: Particle filter

martin42

Re: Particle filter

TheBoy

Re: Particle filter

feeutfo

Re: Particle filter

aaronjb

Re: Particle filter

feeutfo

Re: Particle filter