Elite front seats are completely electric - forward/backward, up/down/pitch, recline/incline. I'm no expert on other models so I couldn't say for sure but I do know that MV6 leather seats only have electric height control, everything else is manual.
I've just fitted Elite seats to my MV6 - in the last 2 days to be exact - and the wiring mods were easy when you follow
TB's guide by clicking hereOn the 2 thick cables you have to get power and earth from, you can expose the inner core without cutting the wire by using a pair of "automatic" wire strippers, like these...
You can then solder the other wires onto the exposed copper. Personally, I used an in-line fuse holder on the +ve side because you are connecting into Fuse 5 which is 30Amps.
Here's what I mean...
And when all tidied up...
Easy to do while the seat is out, but you will need a reasonably powerful soldering iron!!!
Oh, and I didn't notice the Elite seats being
that much heavier than the MV6 seats that came out, but then there was a day between the old coming out and the new going in.
Hope that helps in some small way!