Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bigtow]

I cannot recommend installing cruise without the clutch switch, doing so would be a bit brain dead.

So you need to Tech2 the ECU to manual, and install the wiring and fit the clutch switch.

the ecu is a manual one .this is why i want the pins to install the correct wiring

[TheBoy]

[bigtow]

That's it I just need a couple of unused ones

[Kevin Wood]

If you get hold of a 2nd hand connector you might find you can extract a pin with a length of wire attached and then insert it into yours, assuming the unused holes in the connector receptacle are there and haven't been plugged with something.

[zirk]

Ive got some tools somewhere for removing and installing pins for RS232 type connecters and Im also scrapping a Mig at the moment, will have a look and see if I can get some pins out from the loom this weekend if I get time.

[bigtow]

thank you