Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: 1 2 3 4 [5]  All   Go Down

Author Topic: How do I remove the oil filter body on a paper element filter?  (Read 10583 times)

0 Members and 1 Guest are viewing this topic.

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: How do I remove the oil filter body on a paper element filter?
« Reply #60 on: 18 August 2013, 18:51:55 »
Quote from: dbdb on 18 August 2013, 18:00:20
Quote from: terry paget on 18 August 2013, 17:28:06
Gosh! Now I see the hexagon. Thanks.

No that's not what we have been calling a hexagon  ::).  That is a bolt head as written in the description and is a male fitting.  Requires a  socket (female) to undo. A hex fitting is a female fitting i.e. with the hex inside and undone by a male hex (allen) key. Apparently there are three fittings, bolt head as shown, hex like I have and torx which I have never seen, presumably a female torx requiring a male torx to undo.

Said that 3 days ago - Doh ::)
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

dbdb

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • west london
  • Posts: 714
  • Tramlining,Trade Club,WIM,my time racing,Linux etc
    • f/l elite 2.6 V6 manual
    • View Profile
Re: How do I remove the oil filter body on a paper element filter?
« Reply #61 on: 18 August 2013, 18:55:15 »
Quote from: dbug on 18 August 2013, 18:51:55

Said that 3 days ago - Doh ::)

Nobody listens to you though ;D ;D ;D ;D
Logged

dbug

  • Omega Queen
  • *****
  • Offline Offline
  • Gender: Male
  • Northants
  • Posts: 14279
  • Dont knock Linux!
    • Jaguar XJ 5.0V8 Portfolio
    • View Profile
    • Dbug IT Services
Re: How do I remove the oil filter body on a paper element filter?
« Reply #62 on: 18 August 2013, 20:42:32 »
Quote from: dbdb on 18 August 2013, 18:55:15
Quote from: dbug on 18 August 2013, 18:51:55

Said that 3 days ago - Doh ::)

Nobody listens to you though ;D ;D ;D ;D

No you don't listen to anybody, as you know it all ;D ;D ;D ;D ;D ;D
Logged
1972 Ferrari Dino, 1967 Triumph TR4A, Mondeo 2.0TDCi Estate, Jaguar XJ 5.0V8 Portfolio

chrisgixer

  • Guest
Re: How do I remove the oil filter body on a paper element filter?
« Reply #63 on: 18 August 2013, 21:37:14 »
Can't argue with a Jedi.

::)
Logged

terry paget

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Midsomer Norton Somerset
  • Posts: 4633
    • 3 Astras 2 Vectra
    • View Profile
Re: How do I remove the oil filter body on a paper element filter?
« Reply #64 on: 19 August 2013, 20:19:17 »
Success! Thanks to all. The T60 long Torx arrived today in an excellent set of Torx, spline and hexagon tools, none of which fitted. I then felt inside, and found an external hexagon, or bolt. A 27mm socket fitted a treat, and off it came. Pictures may follow, if I can master dropbox. I cannot get off the crank sensor, as you may see, because the lead is trapped behind the RH oil pipe.








« Last Edit: 19 August 2013, 20:22:36 by terry paget »
Logged

05omegav6

  • Guest
Re: How do I remove the oil filter body on a paper element filter?
« Reply #65 on: 19 August 2013, 20:23:37 »
Older and wiser people might say different, but if you're changing the crank sensor anyways, just cut the wire :y
Logged

terry paget

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Midsomer Norton Somerset
  • Posts: 4633
    • 3 Astras 2 Vectra
    • View Profile
Re: How do I remove the oil filter body on a paper element filter?
« Reply #66 on: 19 August 2013, 20:34:48 »
Quote from: ex taxi al on 19 August 2013, 20:23:37
Older and wiser people might say different, but if you're changing the crank sensor anyways, just cut the wire :y
That had occurred to me However, the crank sensor is OK, and on 2.5s they are fussy, so the maintenance guide says, and it is essential to buy the right (Siemens) one. I think when I remove the oil pipes I can get the crank sensor out and relocate the cable when I reassemble.

I have clearly failed to post pictures. Dropbox proved tricky before, and is doing so again. Any advice gratefully received.
Logged

terry paget

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Midsomer Norton Somerset
  • Posts: 4633
    • 3 Astras 2 Vectra
    • View Profile
Re: How do I remove the oil filter body on a paper element filter?
« Reply #67 on: 19 August 2013, 21:33:35 »
Pics might appear here.

<br></br><img alt="" src="https://www.dropbox.com/s/6w1tox5n6c5qav1/DSCF2256.jpg"></img>

<br></br><img alt="" https://www.dropbox.com/s/siwh36q8s6hsn4e/DSCF2260.jpg"></img>

<br></br><img alt="" src="https://www.dropbox.com/s/16iilkne95c7m7w/DSCF2262.jpg"></img>

<br></br><img alt="" src="https://www.dropbox.com/s/pnkk8eh49htj9y7/DSCF2263.jpg"></img>
<br></br>
« Last Edit: 19 August 2013, 21:38:21 by terry paget »
Logged

Andy H

  • Omega Lord
  • *****
  • Offline Offline
  • Gender: Male
  • Auckland
  • Posts: 5533
    • Mazda MPV
    • View Profile
Re: How do I remove the oil filter body on a paper element filter?
« Reply #68 on: 19 August 2013, 21:36:07 »
« Last Edit: 19 August 2013, 21:41:04 by Andy H »
Logged
"Deja Moo - The feeling that you've heard this bull somewhere before."

Andy B

  • Get A Life!!
  • *****
  • Offline Offline
  • Gender: Male
  • Bury Lancs
  • Posts: 39777
    • ML350 TDM SmartRoadster
    • View Profile
Re: How do I remove the oil filter body on a paper element filter?
« Reply #69 on: 20 August 2013, 08:45:11 »
Quote from: terry paget on 19 August 2013, 20:19:17
Success! Thanks to all.  .....

Which just goes to show the importance of cleaning as you go ..... you'd have spotted that days ago if you'd had an oily rag to hand  ::)  ::)  ::)
Logged
Pages: 1 2 3 4 [5]  All   Go Up
« previous next »
 

Page created in 0.017 seconds with 17 queries.