Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[PhilRich]

Hi de hi Oofers
My 2002 Desmond estate has lost all forward drive, but I can still engage Reverse
The indicator lights on the gearlever console all behave as they should & I don't have either the EML or Emissions telltale showing on the Dash. Plugging in my A.N.Other code reader gave a P0700 (4) Present, and it returned when cleared. I have checked the gearbox fluid level and condition of the ATF & both are ok. Any ideas please? Many thanks, Phil.    

[TheBoy]

What codes does the TCM have?

[PhilRich]

What codes does the TCM have?

Thanks for the early reply TB The TCM now shows 'Greyed Out' although it never has before,  so no help there i'm afraid

[JamesV6CDX]

Where are you located

[PhilRich]

Where are you located

A good three days Stagecoach ride from you James (assuming only one change of horses)
Seriously though, i'm in Hartlepool on the North side of the River Tees

[PhilRich]

Update: TCM now reading (I had bent one of the pins when plugging the reader in! )

Gearbox Fault Codes:

Total number of fault codes: 5

P1835 - Kickdown Switch Circuit Low Input
 (02) - Not present

P1600 - Internal Power Control Final Stage Watchdog Error
 (08) - Not present

P1781 - <Unknown DTC>
 (00) - Not present

P0730 - Gear Ratio Incorrect
 (08) - Not present

P0722 - Output Speed Sensor Circuit No Signal
 (04) - Not present


Engine Fault Codes are:

Total number of fault codes: 5

P0650 - Malfunction Indicator (MI) Control Circuit Open
 (04) - Present

P1700 - SVS request via CAN
 (00) - Not present

P0700 - MIL request from Transmission Control (TC) Modul
 (02) - Not present

P0141 - O2 Sensor 2 Heater Open Circuit
 (04) - Present

P1555 - Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load
 (00) - Not present

[05omegav6]

Cam sensor

[PhilRich]

Cam sensor

Changed Cam Sensor for a known good one but still no joy. Thanks for the input Al, much appreciated
Anyone got any other ideas before I lose the will to live

[Steve B]

Been looking at your codes

Here is a print out of mine from 2 year ago.

In order to get rid of them all i gave the throttle body/breathers the full clean up (maintenance guide) and put a Brand new VX cam sensor in it.

This is also a 2.2




Total number of fault codes: 5

P1555 - Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load
 (00) - Not present

P0130 - O2 Sensor 1 Open Circuit
 (04) - Not present

P0340 - Camshaft Position Sensor Circuit No Signal
 (04) - Not present

P1700 - SVS request via CAN
 (00) - Not present

P0730 - Gear Ratio Incorrect
 (08) - Not present

[TheBoy]

Fix the known engine ones, and go from there. Just check ABS whilst there

[PhilRich]

Thanks for your input btc, much appreciated
Thanks to you too once again TB, I shall do as you suggest