Topic: Child seat sensor. (Read 1468 times)

dave-b · « **on:** 03 January 2015, 18:22:20 »

The airbag light is on permanently on my FL 3.0 elite, due to a fault in the passenger seat child seat sensor. A tech2 session wouldn't reset the light, and I assume you cant just disconnect the sensor, so what would be the best way to sort this? Is it possible to change the airbag ecu to one from a car without the sensor, or does anyone have a black leather fl elite passenger seat available?
Any help/advice would be most welcome.

RobG · « **Reply #1 on:** 03 January 2015, 18:38:07 »

Two options.
1). Replace seat with known good sensor fitted (easier than changing in-built sensor).
2). Replace SRS ECU with one not configured for the CSS and ensure the flat yellow rectangular connector under seat is NOT re-connected

dave-b · « **Reply #2 on:** 03 January 2015, 19:16:17 »

Quote from: RobG on 03 January 2015, 18:38:07

Replace SRS ECU with one not configured for the CSS and ensure the flat yellow rectangular connector under seat is NOT re-connected

This would seem to be the easier option, does anyone know the correct serial/part no. for this srs ecu?

News:

Author Topic: Child seat sensor. (Read 1468 times)

dave-b

Child seat sensor.

RobG

Re: Child seat sensor.

dave-b

Re: Child seat sensor.