Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[05omegav6]

That made I spill my coffee

Serves you right yeh big bully 
Just cos your post count is massive compared to mine 

That nasty admin bloke can get carried away with the scissors

If it's a girl, then Elizabeth Kate, and if it's a boy the Steven Darth Looknee...

[tigers_gonads]

This is what i'm looking at .............


The threaded bit is what the bolt screws into

[05omegav6]

Plus gas, bigger hammer and mole grips

The actual securing thread is in the lump on the left hand end... bolt should go right to left in that pic

Sticky out bit will come away, the new shock should slot it nicely... needs to be square though otherwise the bolt won't go in

[tigers_gonads]

Plus gas, bigger hammer and mole grips

On the insert on the B4's 

[05omegav6]

Plus gas, bigger hammer and mole grips

On the insert on the B4's 

Christ no on the rusty sticky out bit on the car

[tunnie]

Plus gas, bigger hammer and mole grips

On the insert on the B4's 

No the bit left on the bottom of the mounting. The insert has been pulled off the old shock and stuck on, had the same on our old Elite Estate. Big hammer and wack it off.

[tunnie]

Bottom of my old shock on the Estate

[tigers_gonads]

Percy the persuader and a blast of Plus Gas worked just fine 

Right, that's both shocks off and the top holes taped up.
Time to get piggin wet and attack the underneath with the power washer 

Thanks lads 

[05omegav6]

Job jobbed