Topic: What bits should I salvage from a scrap 3.0 MV6 (Read 1235 times)

woolley11 · « **on:** 08 April 2015, 18:47:33 »

Just about strip some bits off my old MV6 - I sold it last year for £650 and bought it back as a bad mot fail for £200 yesterday. I'll scrap the rest of the car next week.

Just wondered what bits should i concentrate on / hard to find sort of thing.

Varche · « **Reply #1 on:** 08 April 2015, 18:51:47 »

AR35 auto gearbox

3.0 cams

Cruise control

xenon headlights plus washer jets if fitted.

Wheels

terry paget · « **Reply #2 on:** 08 April 2015, 19:24:28 »

wheels & tyres
exhaust if good
cats if good
mirrors
discs if good
crank sensor
radio
coil pack if good
plug leads
coolant header tank
Battery
If they will fit your new car alternator and starter

LC0112G · « **Reply #3 on:** 09 April 2015, 10:39:35 »

If serviceable ... Rear shox suspension pump - under the OSF front bumper. Flog it to any number of LC owners - probably worth £30 to us.

And as it's an MV6 - front and rear shox and springs, though how you move the car with these off it will be interesting.

omegod · « **Reply #4 on:** 09 April 2015, 12:13:43 »

If manual save the box to flog to kit car builders
central Locking solenoids
if 2.6 exhaust manifolds

News:

Author Topic: What bits should I salvage from a scrap 3.0 MV6 (Read 1235 times)

woolley11

What bits should I salvage from a scrap 3.0 MV6

Varche

Re: What bits should I salvage from a scrap 3.0 MV6

terry paget

Re: What bits should I salvage from a scrap 3.0 MV6

LC0112G

Re: What bits should I salvage from a scrap 3.0 MV6

omegod

Re: What bits should I salvage from a scrap 3.0 MV6