Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to OOF

Pages: [1]   Go Down

Author Topic: Starter motors, and testing coil packs...  (Read 1441 times)

0 Members and 1 Guest are viewing this topic.

GastronomicKleptomaniac

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Teesside (the nice bit)
  • Posts: 4070
    • 3.2 plod, 2.6 MV6, etc
    • View Profile
Starter motors, and testing coil packs...
« on: 26 April 2015, 19:45:23 »
New one is being a problem child - firstly, its taking a few attempts to get the starter to, well, start - ignition off and on three or four times with only a click, before it goes "oh, hang on, he wants something" and starts. Sticky starter? Battery is healthy as can be.

Secondly, Ive done the scuttle reseal job, but I think I was too late and have fried another coil pack - before I buy another one, are there any tests I can do with a meter? Its showing misfires on pot 4. Having had the water in the plug wells, is there a good method to clean the remaining rust and gunk deposits? I'm loathe to spray anything down there that might cause a short...
Logged
Servicing and repairs done in NE. Special rates for OOFers! PM me.

GastronomicKleptomaniac

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Teesside (the nice bit)
  • Posts: 4070
    • 3.2 plod, 2.6 MV6, etc
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #1 on: 26 April 2015, 19:46:06 »
Oh, also, are all starters created equal, or do I need to compare any connections? Its a 2002 3.2 manual...
Logged
Servicing and repairs done in NE. Special rates for OOFers! PM me.

chrisgixer

  • Omega Baron
  • *****
  • Offline Offline
  • Woking ham
  • Posts: 2616
  • Banned
    • Irmscher 3.2 Elite lpg
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #2 on: 26 April 2015, 19:48:42 »
Plug tight ion pot 4? How old are plugs generally?
Logged

GastronomicKleptomaniac

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Teesside (the nice bit)
  • Posts: 4070
    • 3.2 plod, 2.6 MV6, etc
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #3 on: 26 April 2015, 19:56:58 »
Quote from: chrisgixer on 26 April 2015, 19:48:42
Plug tight ion pot 4? How old are plugs generally?

Literally had new plugs yesterday - was missing like a bugger as we came up the road last week.

Coil pack is from a breaker, its done maybe 80 miles, but this was before sealing the scuttle...
Logged
Servicing and repairs done in NE. Special rates for OOFers! PM me.

chrisgixer

  • Omega Baron
  • *****
  • Offline Offline
  • Woking ham
  • Posts: 2616
  • Banned
    • Irmscher 3.2 Elite lpg
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #4 on: 26 April 2015, 20:00:41 »
Hmmm. Are we into dodgy loom territory ?

Loom plug ok? Injector ok?

No other codes I take it...?


Can't believe two coil pacs, one old and one new, would behave exactly the same.
Logged

GastronomicKleptomaniac

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Teesside (the nice bit)
  • Posts: 4070
    • 3.2 plod, 2.6 MV6, etc
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #5 on: 26 April 2015, 23:02:17 »
Quote from: chrisgixer on 26 April 2015, 20:00:41
Hmmm. Are we into dodgy loom territory ?

Loom plug ok? Injector ok?

No other codes I take it...?


Can't believe two coil pacs, one old and one new, would behave exactly the same.

Should probably organise my thoughts before posting. The coil pack currently fitted went on when I collected the car about a fortnight ago - major scuttle leak killed the last one. I drained the water and dried it up, but didn't have time to seal the scuttle until yesterday.
 Coil pack fitted was from an Ebay breaker, GM, but unknown condition. I'm wondering if there was some rust or detritus left that is causing a problem in pot 4, hence wondering what to clean it out with - electrical contact cleaner perhaps? Would also like to test the coil pack before sourcing another from OOF...
Logged
Servicing and repairs done in NE. Special rates for OOFers! PM me.

chrisgixer

  • Omega Baron
  • *****
  • Offline Offline
  • Woking ham
  • Posts: 2616
  • Banned
    • Irmscher 3.2 Elite lpg
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #6 on: 26 April 2015, 23:07:41 »
Just for clarity.Has 0304 been constant throughout? Or just on this particular coil PAC?

No idea on testing, sorry. Me no good with sparks.
Logged

05omegav6

  • Guest
Re: Starter motors, and testing coil packs...
« Reply #7 on: 27 April 2015, 13:38:47 »
It could be coincidence that both used coil packs have the same fault... To be sure replace with new and report back...

If the new one behaves the same then you're into loom territory :-\
Logged

GastronomicKleptomaniac

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Teesside (the nice bit)
  • Posts: 4070
    • 3.2 plod, 2.6 MV6, etc
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #8 on: 27 April 2015, 14:08:15 »
Seems like the best COA - the explod needs new ones anyway so it wont go to waste... Ta chaps!

Now, about the starters...
Logged
Servicing and repairs done in NE. Special rates for OOFers! PM me.

Steve B

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Leicestershire
  • Posts: 3639
    • '52' MV6 3.2 Saloon
    • View Profile
Re: Starter motors, and testing coil packs...
« Reply #9 on: 28 April 2015, 11:12:53 »
Forget buying this coil pack if you dont need it.  :y I will happily post it out to you to borrow to eliminate the Others. Its a known working Bosch one done 75 000  :y


 
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.018 seconds with 21 queries.