Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[powerslinky]

Find out what thread and size the adaptor is and see if an engineering firm can make it cheaper,if they can why not put a bulk order in and sell them on here 

If someone does this, then make the centre IIRC 12mm allen key hex. That way you have a better way of tightening it up.

Do the VX ones have a centre hex then ? . . . just thinking of how easy they will be to remove when I visit breakers Sunday morning.

Any ideas on how to remove  . . . 2 x 18mm nuts locked together ? ( if  18mm is correct 

Hex allen key centre would be easy though if it has it 

[driver115]

I got charged £14 by local vx dealer for junction pipe back in 2012 - screw on/spin off makes the job easier, and cheaper

[Nick W]

Al, it's just a tube threaded along its length. If it has been loctited in you might struggle to remove it.
And if you PM me your address I'll post you the one I've just found in my stash of 'useful(one day if I'm lucky) bits'

It's M18x1.5 thread same as the filter/block and 48mm long.

[powerslinky]

Al, it's just a tube threaded along its length. If it has been loctited in you might struggle to remove it.
And if you PM me your address I'll post you the one I've just found in my stash of 'useful(one day if I'm lucky) bits'

It's M18x1.5 thread same as the filter/block and 48mm long.

Thats great Nick . .  pm on it's way in a mo 

Oof at it's finest once again      Thank you     

 Breakfast on me at the next Kent meet then